本文選題：underwater + gas��； 參考：《Journal of Marine Science and Application》2016年04期

【摘要】：Recent progress in calculating gas bubble sizes in a plume, based on phenomenological approaches using the release conditions is a significant improvement to make the gas plume models self-reliant. Such calculations require details of conditions Near the Source of Plume(NSP);(i.e. the plume/jet velocity and radius near the source), which inspired the present work. Determining NSP conditions for gas plumes are far more complex than that for oil plumes due to the substantial density difference between gas and water. To calculate NSP conditions, modeling the early stage of the plume is important. A novel method of modeling the early stage of an underwater gas release is presented here. Major impact of the present work is to define the correct NSP conditions for underwater gas releases, which is not possible with available methods as those techniques are not based on the physics of flow region near the source of the plume/jet. We introduce super Gaussian profiles to model the density and velocity variations of the early stages of plume, coupled with the laws of fluid mechanics to define profile parameters. This new approach, models the velocity profile variation from near uniform, across the section at the release point to Gaussian some distance away. The comparisons show that experimental data agrees well with the computations.
[Abstract]:Recent progress in calculating gas bubble sizes in a plume, based on phenomenological approaches using the release conditions is a significant improvement to make the gas plume models self-reliant. Such calculations require details of conditions Near the Source of Plume(NSP);(i.e. the plume/jet velocity and radius near the source), which inspired the present work. Determining NSP conditions for gas plumes are far more complex than that for oil plumes due to the substantial density difference between gas and water. To calculate NSP conditions, modeling the early stage of the plume is important. A novel method of modeling the early stage of an underwater gas release is presented here. Major impact of the present work is to define the correct NSP conditions for underwater gas releases, which is not possible with available methods as those techniques are not based on the physics of flow region near the source of the plume/jet. We introduce super Gaussian profiles to model the density and velocity variations of the early stages of plume, coupled with the laws of fluid mechanics to define profile parameters. This new approach, models the velocity profile variation from near uniform, across the section at the release point to Gaussian some distance away. The comparisons show that experimental data agrees well with the computations.
【作者單位】： Department
【分類號】：P744.4

【相似文獻】

相關(guān)期刊論文 前8條

1 何恩典,許天增,黃錫明;CHARACTERISTICS OF SOUND PULSETRANSMISSION IN SHALLOW SEA ANDCORRELATION DETECTION[J];Chinese Journal of Oceanology and Limnology;1990年01期

2 ;STUDY ON UNDERWATER ARC CUTTING PHENOMENA AND TECHNOLOGICAL PARAMETERS[J];China Ocean Engineering;1988年01期

3 吳超;葛彤;莊廣膠;劉建民;;Research of Underwater Self-Reconfigurable System[J];Journal of Shanghai Jiaotong University(Science);2014年01期

4 張林;笪良龍;盧曉亭;;Sound propagation in two-axis underwater channel based on beam-displacement ray-mode theory[J];Chinese Journal of Oceanology and Limnology;2007年03期

5 ;THEORETICAL CALCULATION AND EXPERIMENT RESEARCH ON THE HYDRODYNAMIC PERFORMANCE OF UNDERWATER CABLES[J];China Ocean Engineering;1988年03期

6 ;Special ROV- Underwater Tunnel Inspector (UNTI)[J];China Ocean Engineering;1993年04期

7 ;MATLAB-Based Simulation of Buoyancy-Driven Underwater Glider Motion[J];Journal of Ocean University of China;2008年01期

8 ;[J];;年期

相關(guān)會議論文 前1條

1 ;Fault diagnosis of underwater vehicles based on SMO[A];第十五屆中國海洋（岸）工程學(xué)術(shù)討論會論文集(上)[C];2011年

，

本文編號：1803704