本文選題：水平井 + 鉆井提速�。� 參考：《東北石油大學》2015年碩士論文

【摘要】：紅崗地區是吉林油田油藏開發評價重點區域,其中紅90-1區塊是水平井開發示范區。該區地層條件復雜、穩定性差,鉆井過程中存在井漏、井塌等問題,同時下部地層巖石可鉆性較差,鉆井速度慢,導致水平井鉆井周期長、成本高,嚴重制約該區的開發建設速度。本文針對以上難點開展了紅崗地區水平井鉆井提速配套技術研究。針對紅崗、大安地區水平井特點優選了能夠滿足安全快速鉆井的二開井身結構、三開小井眼水平井井身結構,能夠有效地節約鉆井成本。形成了兩口井、四口井平臺水平井優化設計技術,優化了水平井井眼控制技術,提高了軌跡控制精度,有效地增加了復合鉆進井段比例,增加了鉆井速度。以紅90-1水平井測井?dāng)?shù)據為基礎,對紅90-1區塊三開井段地層巖石可鉆性進行了分析評價。通過個性化鉆頭優化設計及提速試驗,三開井段、二開井段機械鉆速均取得了顯著提高。開展了紅崗地區水平井鉆井液技術研究,優選了KCL-聚合物鉆井液體系,對該鉆井液體系性能進行了分析評價,能夠減少井下復雜情況的發生,滿足紅崗地區水平井安全快速鉆進要求。本文形成的上述紅崗地區水平井鉆井提速配套技術已在吉林油田其他區塊推廣應用,進一步提高了這些地區水平井鉆井速度。
[Abstract]:Honggang area is the key area for reservoir development evaluation in Jilin Oilfield, and Hong90-1 block is the demonstration area for horizontal well development.In this area, the formation conditions are complex, the stability is poor, well leakage, well collapse and so on exist in the drilling process. At the same time, the rock drillability of the lower formation is poor and the drilling speed is slow, which leads to the long drilling period and high cost of horizontal well drilling.Seriously restrict the speed of development and construction in this area.In view of the above difficulties, this paper studies the matching technology of drilling speed increase in horizontal well in Honggang area.According to the characteristics of horizontal wells in Honggang and Da'an areas, the second well structure and the horizontal well structure with three small holes can be selected to meet the requirements of safe and fast drilling, which can effectively save the drilling cost.Two wells, four wells platform horizontal well optimization design technology is formed, the horizontal well hole control technology is optimized, the trajectory control accuracy is improved, the compound drilling section proportion is effectively increased, and the drilling speed is increased.Based on the logging data of Hong90-1 horizontal well, the drillability of formation rock in the third section of Hong90-1 block is analyzed and evaluated.Through the optimization design of individualized bit and the test of raising speed, the mechanical drilling speed of the three open section and the second section have been improved remarkably.The drilling fluid technology of horizontal well in Honggang area was studied, KCL-polymer drilling fluid system was selected, and the performance of the drilling fluid system was analyzed and evaluated, which can reduce the occurrence of downhole complex situation.Meet the requirements of safe and rapid drilling of horizontal wells in Honggang area.In this paper, the matching technology of drilling speed increase in horizontal wells in Honggang area has been popularized and applied in other blocks of Jilin Oilfield, and the drilling speed of horizontal wells in these areas has been further improved.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE243

【參考文獻】

相關期刊論文 前1條

1 胡玉;蔣西平;李鵬;;昌吉致密油先導試驗區鉆井提速及工具國產化[J];新疆石油科技;2014年03期

，

本文編號：1756029