本文選題：安塞油田　切入點：調剖工藝　出處：《西安石油大學》2015年碩士論文

【摘要】：隨著安塞油田大部分區塊都進入水驅開發的中后期,油井含水越來越高,產量遞減越來越快,但地下可采儲量仍然較大,如何提高中高含水期油田開采效益已成為油田關注的一個焦點。本研究以長10油藏作為研究對象,開展儲層調剖工藝優化技術研究,通過理論分析、室內模擬實驗與工藝優化,明確影響長10油藏儲層調剖效果的關鍵因素,獲得儲層調剖最佳時機以及礦場實用的決策方法;建立長10儲層調剖劑選擇標準與工藝參數計算模型,提出合理的調剖工藝與施工步驟,最終形成一套適合安塞油田長10儲層調剖工藝優化方法,為礦場調剖施工提供指導與技術支撐。具體研究?jī)?nèi)容包括以下三個方面:(1)安塞油田長10儲層注水開發與調剖現狀分析通過分析安塞油田長10儲層巖石、流體物性以及目前注水開發與調剖現狀,在具體分析影響調剖效果因素基礎上明確長10儲層注水低效與調剖效果差的原因與機制。(2)安塞油田長10儲層調剖時機選擇研究從長10儲層地質特征和生產動態數據出發,建立礦場實用的注水井調剖決策方法,并通過長管模型驅油實驗和平板模型驅油實驗室內模擬調剖時機對長10儲層注水剖面與原油采收率的影響,明確長10儲層儲層調剖最優時機。(3)安塞油田長10儲層儲層調剖工藝優化方法研究根據長10儲層物性、流體性質等因素,結合室內巖心流動實驗,建立調剖劑選擇標準與工藝參數方法,為現場調剖施工提供有效指導。
[Abstract]:As most of the blocks in Ansai Oilfield enter the middle and late stages of water drive development, the water cut of oil wells is getting higher and higher, and the production is decreasing faster and faster, but the underground recoverable reserves are still large.How to improve the production efficiency of middle and high water cut oil field has become a focus of attention.This study takes Chang10 reservoir as the research object, carries out the research on the optimization technology of reservoir profile control technology. Through theoretical analysis, laboratory simulation experiments and process optimization, the key factors that affect the reservoir profile control effect of Chang 10 reservoir are identified.The optimal time for profile control in reservoir and the practical decision method in mine field are obtained, the selection standard and calculation model of parameters of profile control agent for Chang 10 reservoir are established, and the reasonable profile control technology and construction steps are put forward.Finally, a set of optimization method for profile control technology of Chang10 reservoir in Ansai oilfield is formed, which provides guidance and technical support for profile control construction in mine field.The specific research contents include the following three aspects: 1) the current situation of water injection development and profile control of Chang 10 reservoir in Ansai Oilfield. Through the analysis of rock, fluid physical properties and current situation of water injection development and profile control in Chang 10 reservoir in Ansai Oilfield,On the basis of specific analysis of the factors affecting profile control effect, the causes and mechanism of low water injection efficiency and poor profile control effect in Chang 10 reservoir are determined. The study on the timing of profile control in Chang 10 reservoir in Ansai Oilfield is based on the geological characteristics and production performance data of Chang 10 reservoir.A practical profile control decision method for water injection wells in mine field is established, and the effect of profile control time on injection profile and oil recovery of Chang10 reservoir is simulated by long tube model flooding experiment and flat model oil displacement laboratory.Study on optimizing method of profile Control Technology for Chang10 Reservoir in Ansai Oilfield according to physical property and fluid property of Chang 10 reservoir, combined with indoor core flow experiment,The selection standard and process parameter method of profile control agent are established to provide effective guidance for field profile control construction.
【學位授予單位】：西安石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE357

【參考文獻】

相關期刊論文 前9條

1 孫士友;;影響新立油田調剖效果因素分析[J];中國石油和化工標準與質量;2011年04期

2 汪洪;喬方;于春濤;;影響調剖效果因素的分析[J];鉆采工藝;2008年S1期

3 熊春明;唐孝芬;;國內外堵水調剖技術最新進展及發展趨勢[J];石油勘探與開發;2007年01期

4 田士章;王永志;嚴萬洪;;堵水調剖劑堵水機理與性能評價[J];遼寧化工;2007年01期

5 肖建洪;姜娜;馬輝;陳輝;;聚合物驅后凝膠復合體系調驅技術及應用[J];油氣地質與采收率;2006年05期

6 張建;李國君;;化學調剖堵水技術研究現狀[J];大慶石油地質與開發;2006年03期

7 劉翔鶚;我國油田堵水調剖技術的發展與思考[J];石油科技論壇;2004年01期

8 馮其紅,陳耀武,郭京來;注水井調剖效果預測統計方法研究[J];石油鉆采工藝;2003年06期

9 殷艷玲,張貴才;化學堵水調剖劑綜述[J];油氣地質與采收率;2003年06期

相關碩士學位論文 前2條

1 何依林;安塞油田注水井調剖效果評價方法研究與應用[D];西安石油大學;2013年

2 蔣蕾;安塞油田高52區長10砂體展布與儲層特征研究[D];西安科技大學;2010年

，

本文編號：1691765