耐高溫超低濃度納米胍膠壓裂液性能評價研究
發布時間:2018-03-31 05:20
本文選題:超低濃度 切入點:納米 出處:《現代化工》2017年05期
【摘要】:致密砂巖儲層孔滲低、物性差,必須經過水力壓裂改造后才能具有較好的產能。為了降低施工成本和壓裂液對儲層的傷害,同時在高溫條件下具有良好的耐剪切性能和破膠性能,需要研發一種耐高溫、低傷害的壓裂液體系。以改性納米二氧化硅為交聯劑,對新型耐高溫超低濃度納米二氧化硅壓裂液性能進行了較為全面的評價研究。結果表明,該壓裂液體系在135℃條件下剪切2 h后平均黏度為100 m Pa·s,具有良好的攜砂能力。破膠液殘?jiān)|(zhì)量為常規胍膠壓裂液質量的37.2%,破膠液的表面張力小,具有良好的返排性,壓裂液與地層水配伍性好。超低濃度納米胍膠壓裂液大幅降低了對地層的傷害程度,適用于低滲的致密砂巖儲層。
[Abstract]:The porosity and permeability of tight sandstone reservoir is low, and its physical property is poor. In order to reduce the cost of operation and the damage of fracturing fluid to reservoir, it is necessary to have good productivity after hydraulic fracturing. At the same time, it is necessary to develop a kind of fracturing liquid system with high temperature resistance and low damage. The modified nano-silica is used as crosslinking agent. The properties of a new type of nano-silica fracturing fluid with high temperature resistance and ultra-low concentration have been comprehensively evaluated. The average viscosity of the fracturing fluid is 100 MPA s after shearing at 135 鈩,
本文編號:1689326
本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/1689326.html
最近更新
教材專著