本文選題：尕斯庫勒油田E油藏　切入點：星形抗溫耐鹽聚合物　出處：《中國科學:技術科學》2017年01期

【摘要】：通過室內試驗,研究了聚合物分子量、聚合物濃度、交聯劑用量及pH等因素對耐高溫有機交聯劑HT-2008與高分子量星形抗溫耐鹽聚合物CA-2588形成的凝膠黏度和成膠時間的影響,確定了尕斯庫勒E_3~1油藏高溫高鹽可動凝膠調驅體系的基本配方及性能:環境掃描電子顯微鏡結果表明,高分子量星形抗溫耐鹽聚合物CA-2588和耐高溫有機交聯劑HT-2008能夠形成穩定的互穿網絡體型結構,該可動凝膠體系,在礦化度為117000mg/L(且鈣鎂離子含量高達3340 mg/L),pH為7.80,實驗溫度為126℃條件下,5d時黏度達到最高值43900 mPa s,180 d時凝膠黏度為43500 mPas,耐溫耐鹽性能好,穩定性好;通過考察不同結構的滲吸劑相態、滲吸脫油效率和長期穩定性等因素,確定了適用于尕斯庫勒油田E_3~1高溫高鹽油藏的3種滲吸劑LF1008,AESN70和N111-2.在尕斯庫勒油田E_3~1油藏進行可動凝膠.滲吸深部調驅現場應用后,取得良好效果.
[Abstract]:The effects of molecular weight of polymer, concentration of polymer, amount of crosslinking agent and pH on gel viscosity and gelation time of high temperature resistant organic crosslinking agent HT-2008 and high molecular weight star temperature resistant salt resistant polymer CA-2588 were studied. The basic formula and properties of the high temperature and high salt movable gel control flooding system in Gasikul Ezhe 1 oil reservoir were determined. The results of environmental scanning electron microscope showed that, High molecular weight star-resistant and salt-tolerant polymer (CA-2588) and high temperature resistant organic crosslinking agent (HT-2008) can form a stable interpenetrating network structure. When the salinity is 117,000 mg / L (and the Ca / mg ~ (2 +) content is up to 3340 mg / L ~ (-1) pH = 7.80) and the experimental temperature is 126 鈩，

本文編號：1665306