本文選題：注水地面管網系統　切入點：運行參數　出處：《東北石油大學》2015年碩士論文　論文類型：學位論文

【摘要】：遼河油田茨榆坨采油廠由于注水區塊多,地質情況復雜,對注水地面管網系統的運行目前還缺少即時可靠的動態分析方法。開展油田注水地面管網系統運行參數優化研究,對于遼河油田茨榆坨采油廠注水地面管網系統的動態跟蹤、高效運行、節能降耗無疑具有重要意義。本文根據物質守恒原理及流體力學理論,在完善了油田注水地面管網系統運行參數計算數學模型的基礎上,以油田注水地面管網系統單耗為目標函數,以油田注水地面管網系統設計注水參數為約束條件,建立了油田注水地面管網系統運行參數優化數學模型,并給出了相應的數值計算方法;由上述數學模型及相應的數值計算方法,應用Visual Basic 6.0及Excel數據庫編制了“遼河油田茨榆坨采油廠注水地面管網系統運行參數優化”程序,并據其對遼河油田茨榆坨采油廠注水地面管網系統井口壓力、管網管線流量、流速、壓降、泵的運行工況、注水地面管網系統效率、單耗進行了數值計算與分析,并得到了優化的注水站泵排量。上述研究成果可為遼河油田茨榆坨采油廠注水地面管網系統的節能降耗提供可靠的理論和技術支撐。
[Abstract]:Due to the large number of water injection blocks and complicated geological conditions, the operation of water injection surface pipe network system in Liaohe Oilfield is still short of reliable dynamic analysis method. The optimization of operation parameters of surface water injection pipe network system in oil field is studied. It is of great significance for the dynamic tracking, efficient operation, energy saving and consumption reduction of the water injection surface pipe network system in the oil production plant of Liaohe Oilfield. This paper is based on the principle of material conservation and the theory of hydrodynamics. On the basis of perfecting the mathematical model of operation parameters calculation of oilfield water injection surface pipe network system, the unit consumption of oilfield water injection surface pipe network system is taken as the objective function, and the design water injection parameter of oilfield water injection surface pipe network system is taken as the constraint condition. A mathematical model for optimizing operation parameters of oilfield water injection pipeline network system is established, and the corresponding numerical calculation method is given, and the above mathematical model and corresponding numerical calculation method are given. Based on Visual Basic 6.0 and Excel database, the program of "optimization of operation parameters of water injection surface pipe network system in Cishutuo Oil production Plant of Liaohe Oilfield" is compiled. According to the program, the wellhead pressure and pipeline flow rate of water injection surface pipe network system in Tsiyutuo Oil production Plant of Liaohe Oilfield are analyzed. The flow rate, pressure drop, pump operating condition, water injection surface pipe network system efficiency and unit consumption are numerically calculated and analyzed. The above research results can provide reliable theoretical and technical support for the energy saving and consumption reduction of the water injection surface pipe network system in the Zi-yutuo Oil production Plant of Liaohe Oilfield.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE357.6

【參考文獻】

相關期刊論文 前4條

1 任永良;張東輝;賈光政;王金東;;基于約束變尺度法的油田注水系統運行成本優化[J];科學技術與工程;2009年09期

2 王旱祥;楊德偉;;油田注水地面枝狀管網水力計算[J];中國石油大學學報(自然科學版);2010年01期

3 何志英;王瑞杰;劉運強;樊紅旗;劉亭;;油田注水系統效率的計算及提高措施[J];油氣田地面工程;2012年06期

4 彭麗娟;;油田注水系統優化控制數學模型設計[J];油氣田地面工程;2014年12期

，

本文編號：1618486