本文選題：稠油　切入點：蒸汽吞吐　出處：《東北石油大學》2015年碩士論文　論文類型：學位論文

【摘要】：如何高效地開發儲量豐富的稠油資源,一直是油氣開采領域的一大課題,對于稠油油藏進行精細地質建模和數值模擬顯得尤為重要,其模擬結果過對稠油油藏的開發調整設計具有指導意義。坨7塊東一段稠油油藏屬于勝利油田,油藏邊、底水水體很大,地質情況復雜,開發難度較大。以該區塊為研究對象,分析了其地質狀況,回顧了其開發歷程,歸納了地質特征和開發特征;分析了稠油在多孔介質中的滲流機理、考慮熱傳遞的滲流微分方程,利用數值方法進行求解。在分析研究區塊地質特征的基礎上,利用靜態資料建立了區塊的三維地質模型,進一步描述了區塊的油水分布、物性參數、斷層走向等特征。在地質模型的基礎上進行了數值模擬研究,建立了區塊靜態和動態數據流模型,擬合了區塊近20年的生產歷史,主要包括地質儲量以及產油量、產液量、含水率等主要開發指標,對擬合結果進行了評價。模型建立精度較高,利用此模型對設計的開發調整方案進行預測,預測結果可以進一步指導區塊的開發。
[Abstract]:How to develop rich reserves of heavy oil resources efficiently has been a major topic in the field of oil and gas production. It is particularly important to carry out fine geological modeling and numerical simulation for heavy oil reservoirs. The simulation results have guiding significance for the development adjustment and design of heavy oil reservoir. The heavy oil reservoir in the east section of Tuo7 block belongs to Shengli Oilfield. The reservoir edge and bottom water are very large, the geological situation is complex, and the development is difficult. This paper analyzes its geological condition, reviews its development course, induces geological characteristics and development characteristics, analyzes the seepage mechanism of heavy oil in porous media, and gives a differential equation of seepage considering heat transfer. Based on the analysis and study of the geological characteristics of the block, the three-dimensional geological model of the block is established by using static data, and the distribution of oil and water and the physical parameters of the block are further described. Based on the geological model, the static and dynamic data flow models of the blocks are established, and the production history of the blocks in the past 20 years is fitted, which mainly includes geological reserves, oil production, liquid production, etc. The fitting results are evaluated by the main development indexes such as water cut. The model has a high precision. The model can be used to predict the design development adjustment scheme, and the prediction result can further guide the development of the block.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE345

【參考文獻】

相關期刊論文 前2條

1 關文龍;席長豐;陳亞平;張霞;木合塔爾;梁金中;黃繼紅;吳鍵;;稠油油藏注蒸汽開發后期轉火驅技術[J];石油勘探與開發;2011年04期

2 陳民鋒,郎兆新,莫小國;超稠油油藏蒸汽吞吐參數優選及合理開發界限的確定[J];石油大學學報(自然科學版);2002年01期

，

本文編號：1565673