本文關鍵詞： 鋁礬土 白云石 鉀長石 壓裂支撐劑　出處：《硅酸鹽通報》2017年07期 　論文類型：期刊論文

【摘要】：以二級鋁礬土(65wt%Al_2O_3)和鉀長石為原料,在添加不同含量的白云石的基礎上制備了超低密高強的壓裂支撐劑,并研究了白云石的添加量對燒成溫度和石油壓裂支撐劑性能的影響。結果表明:在原料中加入適量的鉀長石,不僅可以降低燒結溫度,同時還能降低壓裂支撐劑的密度;添加白云石能有效降低支撐劑的燒結溫度和破碎率,同時白云石和鉀長石共同作用,促進了燒結致密化的進行,有利于棒狀莫來石的生長發育,從而提高了支撐劑的強度。當白云石的添加量為2wt%,燒結溫度為1330℃時,所制備的壓裂支撐劑性能最優,其體密僅為1.30 g/cm~3,52 MPa下的破碎率為4.51wt%。
[Abstract]:The ultra-low density and high strength fracturing proppant was prepared on the basis of the addition of dolomite with different content of potassium feldspar and secondary bauxite (65 wt) and potassium feldspar as raw materials. The effect of dolomite addition on sintering temperature and properties of petroleum fracturing proppant is studied. The results show that adding appropriate amount of potassium feldspar into raw material can not only reduce sintering temperature. At the same time, it can reduce the density of fracturing proppant. The addition of dolomite can effectively reduce the sintering temperature and breakage rate of proppant, at the same time, dolomite and potassium feldspar act together to promote the sintering densification, which is conducive to the growth and development of rod-like mullite. Therefore, the strength of proppant is improved. When dolomite is added for 2 wt and sintering temperature is 1330 鈩，

本文編號：1466990