天堂国产午夜亚洲专区-少妇人妻综合久久蜜臀-国产成人户外露出视频在线-国产91传媒一区二区三区

當前位置:主頁 > 科技論文 > 石油論文 >

縫洞型底水氣藏水平井水侵動態數學模型與影響因素研究

發布時間:2018-01-21 08:09

  本文關鍵詞: 縫洞型氣藏 臨界產量 水錐突破時間 滲透率變異模型 底水錐進 出處:《現代地質》2017年03期  論文類型:期刊論文


【摘要】:在含有底水的氣藏開發過程中,隨著氣體的采出,氣井井底壓力逐漸降低,底水會發生向上錐進的現象,嚴重影響產氣。因此若能預先求得氣井水侵動態,這對于開發底水氣藏具有重要的意義。同時,與常規底水氣藏不同,縫洞型底水氣藏呈現出三重介質的特性,溶洞和天然裂縫較發育,其非均質性較強,氣體滲流的過程更為復雜。通過采用滲透率變異處理儲層中裂縫、溶洞的發育,考慮到裂縫和溶洞的存在僅改變了儲集層的滲透率,同時在均質底水氣藏水平井水錐動態計算方法的基礎上,利用滲透率變異理論建立了縫洞型底水氣藏臨界產量和水錐突破時間公式,并對其影響因素進行了分析。根據所得公式可以近似求解縫洞型底水氣藏中水平井的臨界產量、見水時間以及見水位置,可用來指導實際縫洞型儲層水平井的合理開發,延緩開發過程中底水錐進,延長見水時間,同時還可以確定見水位置為后續壓錐及堵水調剖的實施提供依據。通過建立的數值模擬模型以及實際生產數據,驗證了本方法研究的可靠性,數值模擬結果從直觀上展示了縫洞型底水氣藏水平井水錐研究的正確性。
[Abstract]:In the process of gas reservoir development with bottom water, with the gas recovery, the bottom pressure of gas well gradually decreases, and the bottom water will be tapered upward, which will seriously affect the gas production. Therefore, if we can get the water invasion performance of gas well in advance. This is of great significance to the development of bottom water gas reservoirs. At the same time, different from conventional bottom water gas reservoirs, the fracture-cavity bottom water gas reservoirs show the characteristics of triple medium, and the caverns and natural fractures are relatively developed, and their heterogeneity is strong. The process of gas percolation is more complicated. By using permeability variation to deal with the fractures in the reservoir, the development of cavities, considering the existence of fractures and caverns, only changes the permeability of reservoir. At the same time, on the basis of the calculation method of water cone performance of horizontal well in homogeneous bottom water gas reservoir, the formula of critical production and water cone breakthrough time of fractured bottom water gas reservoir is established by using permeability variation theory. According to the formula, the critical production rate, water breakthrough time and water location of horizontal wells in the fractured bottom water gas reservoir can be approximately solved. It can be used to guide the rational development of horizontal wells in the actual fractured and cavernous reservoirs, delay the bottom water coning in the development process, and prolong the water breakthrough time. At the same time, the location of water can be determined to provide the basis for the implementation of the subsequent pressure cone and profile control. The reliability of this method is verified by the established numerical simulation model and actual production data. The numerical simulation results show the correctness of the research on the water cone of the horizontal well in the fractured-cave bottom water gas reservoir.
【作者單位】: 中國地質大學(北京)能源學院;中國石油勘探開發研究院;
【基金】:國家科技重大專項“超高壓有水氣藏高效開發技術”(2016ZX05015-002);國家科技重大專項“稠油、碳酸鹽巖和致密油藏開發主體技術與應用潛力”(2016ZX05016-006)
【分類號】:TE37
【正文快照】: 0引言國內外很多氣田為碳酸鹽巖儲層,儲集體大多表現為縫洞型的特性,氣田埋藏較深且大多數含有邊底水,這使得這類型的氣田的開發較常規砂巖有水氣藏的開發難度大大增大,水侵動態規律的研究是碳酸鹽巖儲層有水氣藏在開發過程中所要解決的重點問題。底水氣藏水侵動態研究的主要

【相似文獻】

相關期刊論文 前10條

1 鄭松青;盧占國;孫華;;縫洞型介質內單相流體流動特征[J];大慶石油學院學報;2009年06期

2 黃朝琴;姚軍;李亞軍;王晨晨;呂心瑞;;基于均勻化理論的縫洞型介質滲透性分析[J];中國科學:技術科學;2010年09期

3 閆豐明;康毅力;孫凱;杜春朝;;縫洞型碳酸鹽巖儲層漏失模型及控制對策[J];鉆井液與完井液;2012年03期

4 李隆新;吳鋒;張烈輝;李允;;縫洞型底水油藏開發動態數值模擬方法研究[J];特種油氣藏;2013年03期

5 劉得軍;馬中華;張穎穎;閆景富;艾清慧;;縫洞型儲層隨鉆測井自適應有限元法數值模擬[J];地球物理學進展;2013年02期

6 劉莉莉;陳小凡;崔力公;;塔河油田縫洞型碳酸鹽巖油藏含水變化主要影響因素分析[J];新疆石油天然氣;2008年01期

7 趙永強;閆國亮;譚猛;;應用Darcy-Stokes方程求解縫洞型介質的滲透率[J];石油鉆探技術;2010年04期

8 張烈輝;李成勇;劉啟國;李允;;邊界元理論在縫洞型非均質油藏滲流研究中的應用[J];石油與天然氣地質;2007年04期

9 李秀娟;黃廣慶;;塔河油田碳酸鹽巖縫洞型油氣藏注水替油開發研究[J];江漢石油職工大學學報;2009年06期

10 劉昱;魏宏讓;;縫洞型底水油藏見水時間預測方法研究[J];內蒙古石油化工;2010年03期

相關會議論文 前5條

1 李一嵐;康毅力;李大奇;杜春朝;李冬梅;;綜合損害指數——評價縫洞型儲層損害的一個新指標[A];滲流力學與工程的創新與實踐——第十一屆全國滲流力學學術大會論文集[C];2011年

2 林加恩;李亮;楊慧珠;;管流與滲流耦合流動理論研究初探[A];第九屆全國滲流力學學術討論會論文集(一)[C];2007年

3 陳振標;李軍;張超謨;;測井新技術評價方法在縫洞型儲層中的應用[A];湖北省石油學會測井專業委員會2007年年會論文集[C];2007年

4 曹俊興;;基于系統辨識的縫洞型油氣藏刻畫問題研究[A];中國地球物理學會第22屆年會論文集[C];2006年

5 吳成;張?jiān)诮?胡中平;王立歆;徐穎;;縫洞型儲層地震特征分析——以塔河6-7區為例[A];中國地球物理2013——第二十專題論文集[C];2013年

相關博士學位論文 前7條

1 劉愛疆;縫洞型儲層測井綜合評價與流體識別方法研究[D];成都理工大學;2013年

2 王娟;縫洞型凝析氣藏物質平衡方程與提高采收率研究[D];西南石油大學;2013年

3 王殿生;縫洞型介質流動機理實驗與數值模擬研究[D];中國石油大學;2009年

4 李亞軍;縫洞型介質等效連續模型油水兩相流動模擬理論研究[D];中國石油大學;2011年

5 盧占國;縫洞型介質流體流動規律研究[D];中國石油大學;2010年

6 馬靈偉;塔中順南地區縫洞型儲層地震響應特征及識別模式研究[D];中國地質大學;2014年

7 李宗杰;塔河油田碳酸鹽巖縫洞型儲層模型與預測技術研究[D];成都理工大學;2008年

相關碩士學位論文 前7條

1 李金泉;縫洞型儲層地震響應及散射成像方法研究[D];吉林大學;2012年

2 劉金玉;縫洞型介質兩相流動機理的數值模擬研究[D];中國石油大學;2009年

3 高建申;高溫高壓縫洞型儲層電阻率理論研究[D];中國石油大學(華東);2013年

4 閆國亮;基于均勻化方法的縫洞型介質單相和兩相流滲透率理論與數值模擬研究[D];中國石油大學;2010年

5 鄭鑫平;高石梯縫洞型氣藏氣水滲流機理實驗研究[D];西南石油大學;2015年

6 馬洪敏;塔里木盆地北部奧陶系碳酸鹽巖含泥縫洞型儲層評價方法研究[D];長江大學;2012年

7 唐潮;縫洞型油藏注水壓降試井解釋方法研究[D];西南石油大學;2015年

,

本文編號:1450940

資料下載
論文發表

本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/1450940.html


Copyright(c)文論論文網All Rights Reserved | 網站地圖 |

版權申明:資料由用戶840c7***提供,本站僅收錄摘要或目錄,作者需要?jiǎng)h除請E-mail郵箱bigeng88@qq.com