本文關鍵詞：鈦合金油管在苛刻井下環境中的抗腐蝕性能研究　出處：《熱加工工藝》2017年06期 　論文類型：期刊論文

  更多相關文章： TC鈦合金 地層水 完井液 CO腐蝕 四點彎曲試驗 應力腐蝕開裂

【摘要】：通過失重腐蝕試驗和應力腐蝕開裂(四點彎曲法)試驗,研究了TC4鈦合金在地層水和完井液環境中抗均勻腐蝕、局部腐蝕和SCC性能。結果表明:在地層水CO_2腐蝕環境中,TC4鈦合金為輕微腐蝕,溫度升高,均勻腐蝕速率變化不大,溫度達到220℃時,均勻腐蝕速率僅為0.0012 mm/a,且試樣表面無局部腐蝕,表明該合金具有良好的抗地層水CO_2均勻腐蝕和局部腐蝕性能;在完井液CO_2腐蝕環境中,TC4鈦合金的均勻腐蝕速率高達0.4247 mm/a,該合金發生明顯的點蝕和選擇性溶解腐蝕;在地層水CO_2腐蝕和完井液CO_2腐蝕環境中SCC試驗均未發現裂紋,具有良好的抗SCC性能。
[Abstract]:The resistance of TC4 titanium alloy to uniform corrosion in formation water and completion fluid was studied through weightlessness corrosion test and stress corrosion cracking (Four-point bending method) test. Local corrosion and SCC properties. The results show that the TC4 titanium alloy is slightly corroded in the formation water CO_2 corrosion environment, the temperature increases, the uniform corrosion rate changes little, and the temperature reaches 220 鈩，

本文編號：1407860