本文關鍵詞：稠油火驅二次點火主控因素及點火策略　出處：《沈陽工業大學學報》2017年01期 　論文類型：期刊論文

  更多相關文章： 火驅 二次點火 通風強度 點火溫度 物理模擬 數值模擬 點火策略 滅火條件

【摘要】：為了實現火驅開發過程中熄火油層再次燃燒,保障火驅開發效果,通過一系列室內物理模擬實驗和油藏數值模擬計算,開展包括點火溫度、通風強度、地下含油飽和度分布、結焦帶等影響二次點火的主控因素的研究,給出了合理的二次點火溫度和通風強度的范圍,同時結合注氣井地下空氣腔規模給出了不同條件下啟動油層二次燃燒的點火策略.結果表明,電點火溫度應控制在450℃以上,點火期間通風強度應維持在10 m~3/(m~2·h)以上,對于需要注燃料油進行二次點火的注氣井,燃料油的用量不低于已燃區空氣腔體積的2/7.
[Abstract]:In order to realize flameout reservoir reburning in the process of fire drive development and ensure the development effect of fire drive, a series of indoor physical simulation experiments and reservoir numerical simulation were carried out, including ignition temperature and ventilation intensity. The distribution of oil saturation, coking zone and other main controlling factors affecting secondary ignition are studied. The reasonable range of secondary ignition temperature and ventilation strength is given. At the same time, combined with the size of underground air chamber in gas injection wells, the ignition strategy for starting secondary combustion of reservoir under different conditions is given. The results show that the electric ignition temperature should be controlled above 450 鈩，

本文編號：1400192