華潤大廈施工模擬
本文選題:混合結構 切入點:施工模擬 出處:《施工技術》2014年S2期
【摘要】:華潤大廈采用了鋼框筒-混凝土核心筒結構體系。由于混凝土材料有鋼材不具備的收縮、徐變效應,且外框柱和筒體自重差別較大,因此外框柱和筒體易產生豎向變形差。采用MIDAS/Gen軟件對該工程進行施工模擬,分析總結出外框柱和筒體的豎向變形規律和其他規律,指導施工,為施工控制提供有效的依據。豎向變形差會導致水平構件產生附加應力,彈性設計階段應予以注意或采取相應措施。
[Abstract]:China Resources Building adopts steel frame-concrete core tube structure system.Due to the shrinkage and creep effect of the concrete material which is not possessed by steel and the difference of the weight of the outer frame column and the cylinder body, the vertical deformation difference between the outer frame column and the tube body is easy to occur.The construction simulation of the project is carried out by using MIDAS/Gen software, and the vertical deformation law and other laws of the outer frame column and the cylinder body are analyzed and summarized to guide the construction and provide an effective basis for the construction control.Vertical deformation difference will result in additional stress of horizontal member, which should be paid attention to or taken corresponding measures in elastic design stage.
【作者單位】: 浙江精工鋼結構集團有限公司;
【分類號】:TU974
【參考文獻】
相關期刊論文 前5條
1 陳迎春;李小飛;何四祥;;MIDAS/Gen在建筑結構施工分析中的應用研究[J];建筑結構;2010年S1期
2 賴寒;何志軍;丁潔民;;上海中心大廈考慮施工過程的豎向變形及差異分析與研究[J];結構工程師;2011年06期
3 周緒紅,黃湘湘,王毅紅,狄謹,劉永健;鋼框架-鋼筋混凝土核心筒體系豎向變形差異的計算[J];建筑結構學報;2005年02期
4 傅學怡;;高層建筑結構垂直荷載下的施工模擬計算[J];深圳大學學報;1992年Z2期
5 傅學怡;孫璨;吳兵;;高層及超高層鋼筋混凝土結構的徐變影響分析[J];深圳大學學報;2006年04期
【共引文獻】
相關期刊論文 前10條
1 莊宇;司有寶;;豎向變形差異對高層結構的影響[J];長春工程學院學報(自然科學版);2011年02期
2 陳燦;徐偉;;徐變影響混合結構施工期豎向變形計算[J];低溫建筑技術;2007年03期
3 袁政強;梁建忠;張守筠;;柱長修正方法的施工模擬程序設計實現[J];重慶大學學報;2010年10期
4 鄭海清;;超高層商住樓結構設計與施工過程關鍵技術分析[J];福建建設科技;2011年03期
5 鄒勇強;陳麟;周云;;鋼框架-鋼筋混凝土核心筒結構的協同工作性能分析[J];鋼結構;2008年09期
6 華建民;謝飛飛;;高層型鋼混凝土框架-核心筒結構施工期豎向變形實測研究[J];工業建筑;2011年10期
7 李勇;管昌生;程驥;王輝;;巨柱框架-核心筒-伸臂桁架結構體系施工過程的動態模擬[J];工業建筑;2013年05期
8 董志君;李筱毅;閻培渝;歐陽蓉;;非荷載因素對超高層結構變形的影響研究[J];工程力學;2013年S1期
9 張龍生;王松帆;周小n,
本文編號:1698743
本文鏈接:http://sikaile.net/kejilunwen/sgjslw/1698743.html