本文選題：開溝刀 + 靜力學分析　； 參考：《江蘇農業科學》2017年20期

【摘要】：開溝刀是果園施肥開溝機的最主要部件,其結構設計是否合理直接影響刀體所受阻力與工作性能。對鏈?zhǔn)焦麍@施肥開溝機的開溝刀切削阻力進行計算,運用Solidworks軟件建立開溝刀三維模型,利用有限元分析軟件Ansys Workbench對開溝刀進行結構靜力學、動力模態及諧響應分析。結果表明,"C"形刀具在作業時不會發生刀體斷裂與刀體畸變,滿足剛度、強度要求;開溝刀在作業時具有良好的動態特性,根據轉速與頻率的關系,其作業過程中不會發生共振現象;開溝刀在作業時,第4、5階固有頻率附近不會發生共振。
[Abstract]:The trench cutter is the most important part of the orchard fertilizing and trenching machine. Whether the structure design is reasonable or not directly affects the resistance and working performance of the knife body. The cutting resistance of the chain orchard fertilizer and trench opener is calculated. The three-dimensional model of the trench cutter is established by using Solidworks software. The structural statics, dynamic mode and harmonic response of the trench cutter are analyzed by using the finite element analysis software Ansys Workbench. The results show that the "C" cutter does not break and distort the cutter body during operation, which meets the requirements of stiffness and strength, and the trench cutter has good dynamic characteristics in operation, according to the relationship between rotational speed and frequency. Resonance does not occur in the process of operation, and resonance does not occur near the 4th-order natural frequency of the trench opener.
【作者單位】： 內蒙古工業大學機械工程學院;
【基金】：國家自然科學基金(編號:51665045) 內蒙古自治區科技重大專項(編號:2015-2017)
【分類號】：S224.2

【相似文獻】

相關期刊論文 前1條

1 吉俊寶;樊啟洲;張衍林;;基于微型開溝機的施肥覆土裝置設計[J];華中農業大學學報;2013年04期

，

本文編號：1902914