mechanical engineering engine loading test dynamic performan
本文關鍵詞:工程機械發動機動態加載試驗裝置,由筆耕文化傳播整理發布。
工程機械發動機動態加載試驗裝置
Test Device of Construction Machinery Engines Under Dynamic Loading
[1] [2] [3] [4]
WANG Hai-fei, YAO Shu-xin, CAO Lei-lei, KONG Yan (Key Laboratory of Road Construction Technology and Equipment, Ministry of Education, Chang'an University, Xi'an 710064, Shaan
長安大學道路施工技術與裝備教育部重點實驗室,陜西西安710064
文章摘要:為了獲得動態性能好、控制精度高的工程機械發動機動態加載試驗裝置,以測試發動機在變負荷工況下的輸出特性,構建了基于恒壓網絡二次調節系統的模型和以預測函數(PFC)為控制算法的新型靜液傳動加載裝置,對其數學模型進行仿真分析,并在所構建的恒壓二次調節加載試驗臺上進行試驗研究。研究結果表明:加載頻率在3Hz內時,所構建的試驗裝置可完全滿足工程機械發動機的工作要求;轉矩幅值控制精度可達96%,響應時間小于0.08s;與傳統的測功機相比,該試驗裝置具有較好的動態性能和加載精度,有利于工程機械發動機動態性能的進一步研究。
Abstr:In order to test the output characteristics of engine under variable load, the construction machinery engine dynamic loading test device with good dynamic performance and high control precision was studied. A new type of hydrostatic transmission load device was constructed based on secondary regulation system of constant pressure network, with the prediction function (PFC) as the control algorithm. Simulation analysis for the mathematical model and experimental research on the secondary regulation loading test bench of constant pressure network were conducted. The results show that when the loading frequency is within 3 Hz, the test device can completely satisfy the requirements work; the accuracy of torqu 0.08 s; compared with and loading precision, dynamic performance. trad whi the construction machinery engine e amplitude control can reach 96% and the response time is less than itional dynamometer, the test device has good dynamic performance ch is helpful for further study on construction machinery engine dynamic performance.
文章關鍵詞:
Keyword::mechanical engineering engine loading test dynamic performance secondary regulation prediction function
課題項目:國家自然科學基金項目(11202036)
作者信息:會員可見
本文關鍵詞:工程機械發動機動態加載試驗裝置,,由筆耕文化傳播整理發布。
本文編號:191327
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/191327.html