本文選題：翻車機 + 定位車�。� 參考：《燕山大學》2012年碩士論文

【摘要】：翻車機是港口卸煤生產線上的重要設備，而定位車在翻車機系統中又起著重要的作用，對港口的卸煤生產產生重要影響。因此該文章對卸煤生產線上的定位車進行分析和研究，解決其在運行過程中出現的實際問題，具有重要的實際應用價值。 黃驊港一期翻車機系統是由德國ThyssenKrupp公司于2001-2003年設計制造的。由于長期高負荷運轉導致設備出現裂縫，以及設備更新?lián)Q代方面的配套等相關問題，嚴重影響了翻車機的正常運轉和生產任務的順利完成，因此要對其進行深入的分析并加以改進。 論文在對定位車仰俯機構的工作原理進行分析的基礎上，對原有仰俯系統進行了運動學分析；并通過機構學知識設計了新型的運動機構，對新機構進行了運動學分析，為其后期改造提供了依據。 針對原大臂的結構和載荷，，進行了靜力學分析，找出大臂結構的薄弱點；針對新設計的大臂進行了靜力學分析，驗證新的大臂結構上的安全可靠性。 根據定位車液壓系統的工作原理，對液壓系統進行分析研究，利用軟件對其進行了仿真計算。找出液壓系統存在的弊端，提出解決方案。
[Abstract]:The dumper is an important equipment in the port coal unloading production line, and the positioning car plays an important role in the dumper system, which has an important impact on the coal unloading production of the port.Therefore, this paper analyzes and studies the positioning vehicle in the coal unloading production line, solves the practical problems in the process of operation, and has important practical application value.Huanghua Port Phase I dump system was designed and manufactured by German ThyssenKrupp Company in 2001-2003.As a result of the long term high load operation resulting in equipment cracks, as well as equipment replacement and other related problems, seriously affected the normal operation of the turning over machine and the smooth completion of production tasks.Therefore, it should be deeply analyzed and improved.Based on the analysis of the working principle of the pitching mechanism of the positioning vehicle, the kinematics analysis of the original pitching system is carried out, and a new type of kinematic mechanism is designed through the knowledge of mechanism, and the kinematics analysis of the new mechanism is carried out.It provides the basis for its later transformation.According to the structure and load of the original arm, the statics analysis is carried out to find out the weakness of the structure of the arm, and the statics analysis of the new designed arm is carried out to verify the safety and reliability of the new structure.According to the working principle of the hydraulic system of the positioning vehicle, the hydraulic system is analyzed and studied, and the software is used to simulate the hydraulic system.Find out the malpractice of hydraulic system and put forward the solution.
【學位授予單位】：燕山大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH237.3

【參考文獻】

相關期刊論文 前10條

1 張慶麗;史桂霞;李強;牟煒;;翻車機工藝系統的改造[J];港口裝卸;2010年03期

2 劉秀芳;曹衛沖;;翻車機液壓系統的安裝與調試[J];港口裝卸;2010年04期

3 玄冠章;尹遜安;;翻車機車皮脫軌故障原因分析及對策[J];硅谷;2010年15期

4 李長安;高素爭;蔡阿濤;;推車機正鉤板設計[J];港口裝卸;2009年04期

5 葛楠;蘇幼坡;王興國;;建筑物滾動摩擦隔震理論[J];河北理工大學學報(自然科學版);2008年04期

6 陳菊芳,李小寧;門式框架的有限元分析[J];機床與液壓;2002年05期

7 張衛東,陳科;基于cosmos/works的壓力機機架設計分析[J];機械設計與制造;2005年01期

8 胡慶婉;劉永財;;超限插值法在有限元網格劃分中的應用[J];科技信息;2010年19期

9 唐紅度;滾動摩擦力計算中彈性滯后系數的確定[J];力學與實踐;2003年05期

10 鄭文俊;李桂花;;翻車機壓車梁松壓故障的分析和解決[J];甘肅科技縱橫;2010年04期

本文編號：1753802