【摘要】：木材加工行業是國民經濟重要的組成部分，近年來，隨著人們物質生活水平的不斷提高，木材加工行業得到了快速發展，而木材干燥技術作為其關鍵技術，，直接影響木制品的質量和使用壽命。由于我國的木材干燥工業起步比較晚，干燥設備和技術距離國外同行先進水平仍有不小差距。本課題的研究目的就是建立一個木材干燥分布式控制系統，對木材干燥過程中溫度、濕度、含水率等關鍵參數周期性的進行采集，根據采集到的數據，按照一定的木材干燥基準，通過對加熱、噴淋、風門等的控制，對木材干燥過程加以相應的控制，提高木材干燥的自動化程度，提高其生產水平和生產效率，這對于我國木材干燥技術的發展能起到一定的推動作用。最后經過模擬仿真和實物運行調試，表明系統可以穩定可靠的對木材干燥過程進行有效的控制，基本上達到了預定的設計目標。
[Abstract]:Wood processing industry is an important part of the national economy. In recent years, with the continuous improvement of people's material living standards, the wood processing industry has been developed rapidly, and wood drying technology as its key technology. Directly affect the quality and service life of wood products. Due to the late start of wood drying industry in China, there is still a big gap between drying equipment and technology and the advanced level of foreign counterparts. The purpose of this paper is to establish a distributed control system for wood drying, which collects temperature, humidity, moisture content and other key parameters periodically, according to the collected data. According to a certain wood drying standard, through the control of heating, spray, air door and so on, the wood drying process is controlled accordingly, the automation degree of wood drying is improved, and its production level and production efficiency are improved. This can play a certain role in promoting the development of wood drying technology in China. Finally, through simulation and physical operation and debugging, it is shown that the system can control the wood drying process stably and reliably, and basically achieve the predetermined design objectives.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP273;TP368.1;TS652

【參考文獻】

相關期刊論文 前4條

1 龔義建;串行通訊接口RS-232/RS485的應用與轉換[J];計算機與數字工程;2003年05期

2 黃永平,金玉善,邢忠寶,李文輝;高效類HDLC異步串行通信協議的實現[J];吉林大學學報(理學版);2003年03期

3 施一明,馮冬芹,金建祥;現場總線的標準發展[J];電工技術雜志;2000年09期

4 程凱 ,孫克怡 ,曹偉 ,金廣奇;RS-485總線理論及應用分析[J];今日電子;2003年06期

相關碩士學位論文 前2條

1 王權岱;基于單片機的木材干燥自動監控系統的研究[D];西北農林科技大學;2003年

2 張佳薇;智能化木材干燥窯自動測試系統的研制[D];東北林業大學;2003年

本文編號：2491392