基于ARM的雙電源信號采集及切換控制技術
[Abstract]:With the development of social economy and the improvement of people's life, the continuity of power supply is becoming more and more important. In order to ensure the continuity of power supply, many important occasions are equipped with two power sources. The automatic switching switch of dual power supply can effectively and accurately realize the switching between the two power sources. The continuous development of modern science and technology has promoted the progress of the overall level of low-voltage electrical appliances to a great extent. The automatic switch of double power supply occupies a very important position in the field of low-voltage electrical appliances, so its importance continues to improve. Performance is also constantly improving, widely used in a variety of important load occasions. Based on the careful study of the working principle of double power automatic switching switch, the hardware circuit is designed and the software program is written in this paper. Based on the embedded Linux system, the driver and application program of the device are written to collect the voltage and frequency signals of the power supply, and the collected results are displayed on the LCD screen. If there is a failure, the microprocessor control switching control device realizes the switching between the common power supply and the standby power supply. In addition, the hardware and software anti-interference measures of dual power automatic switching switch are also studied. The dual power supply signal acquisition system designed in this paper can detect the voltage and frequency signals of the two power sources in real time and accurately, and display the results on the LCD screen. At the same time, the advanced ARM chip and embedded Linux system are applied in this design, which increases the reliability, intelligence and efficiency of the double power automatic switch, improves the overall value of the device, and can be applied to the industrial field.
【學位授予單位】:河北工業大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TN86;TP368.1
【參考文獻】
中國期刊全文數據庫 前10條
1 李道本;雙電源自動切換裝置選用探討[J];電氣應用;2005年05期
2 趙國義;;嵌入式Linux內核的配置與編譯系統研究[J];電腦編程技巧與維護;2006年11期
3 鄒球;;基于ARM2410嵌入式Linux內核的編譯與移植[J];電腦知識與技術;2008年15期
4 畢偉宏;;Linux內核與內核編譯[J];福建電腦;2007年02期
5 張豪;楊春燕;汪筱陽;;S3C2440A芯片及應用[J];電子設計工程;2011年24期
6 蘇哲欣;劉鴻飛;薛曉;;基于嵌入式Linux的LCD驅動分析與實現[J];工業控制計算機;2009年02期
7 徐煒;;Linux運行前探秘之一—內核編譯及引導[J];電腦編程技巧與維護;2011年11期
8 姚莉;熊皓;;基于ARM9的嵌入式Linux應用系統設計[J];黃岡職業技術學院學報;2008年03期
9 夏靖波;牛超;;基于S3C2440A處理器的Linux移植的研究與實現[J];計算機與數字工程;2011年11期
10 胡愛軍;張瑞卿;王聰;;基于ARM9&Linux的AD轉換的實現[J];機械設計與制造;2011年06期
中國碩士學位論文全文數據庫 前4條
1 沈斌;雙電源自動切換系統的設計[D];蘇州大學;2011年
2 王立業;雙電源自動轉換器的設計與研究[D];河北工業大學;2007年
3 齊濤;基于DSP的靜止無功補償裝置的控制研究[D];華北電力大學(河北);2008年
4 趙志杰;基于嵌入式的無線民主測評系統設計與實現[D];大連理工大學;2009年
本文編號:2480477
本文鏈接:http://sikaile.net/kejilunwen/jisuanjikexuelunwen/2480477.html