發布時間：2019-05-12 05:58

【摘要】：設計基于USBD12和加速度計的空中鍵鼠,通過手勢在空中的動作便可控制鼠標的移動。設計的研發調試過程中,采用了加速度傳感器數據采集、USB設備gadget層HID設備、LCD-NOKIA5110顯示、AVR單片機熔絲位的配置、藍牙模塊、手勢動作識別算法、菜單與UI界面等模塊的軟、硬件調試,接收端有一個USB口,插入PC后被識別為一個標準HID人體學輸入設備,無須驅動,即插即用。用戶的操作達到可動態交互的目的。采用動作手勢識別算法,藍牙模塊等實現了通過手勢在空中的動作便可控制鼠標的移動,通過按鍵進行對鍵盤的操作,并且不需要連接線,通過藍牙與插在電腦上的接收端相連接通信,達到動態交互的目的。
[Abstract]:An air mouse based on USBD12 and accelerometer is designed to control the movement of the mouse by gesture movement in the air. In the process of development and debugging, acceleration sensor data acquisition, USB device gadget layer HID equipment, LCD-NOKIA5110 display, AVR MCU fuse position configuration, Bluetooth module, gesture recognition algorithm, menu and UI interface module soft, etc. Hardware debugging, the receiver has a USB port, inserted into the PC is identified as a standard HID input device, no need to drive, plug and play. The user's operation achieves the purpose of dynamic interaction. The motion gesture recognition algorithm and Bluetooth module are used to control the movement of the mouse through the movement of the gesture in the air, and the keyboard is operated by keystrokes, and there is no need to connect the line. Through Bluetooth communication with the receiver inserted on the computer, the purpose of dynamic interaction can be achieved.
【作者單位】： 遵義師范學院物理與電子科學學院;
【基金】：貴州省聯合基金項目(黔科合LH字[2015]7008號)
【分類號】：TP334.2
，

本文編號：2475158