【摘要】：為真實反映產品的實際使用情況,準確驗證軟硬件綜合系統的可靠性,將軟件可靠性測試以及硬件可靠性試驗進行了綜合,提出一種基于剖面映射的軟硬件可靠性綜合試驗方法.該方法首先確定軟件測試剖面以及綜合環境應力剖面,然后利用剖面映射將軟件測試剖面與綜合環境應力剖面結合起來,形成軟硬件可靠性綜合試驗剖面;該綜合試驗剖面真實反映了軟件運行和外部環境條件變化之間的關聯,避免了軟件可靠性測試和硬件可靠性試驗分別進行所帶來的試驗風險和資源浪費,在減少測試代價的同時實現了一次試驗即驗證產品的可靠性.實驗結果表明了該方法的可行性、合理性和有效性.
[Abstract]:In order to truly reflect the actual use of the product and verify the reliability of the software and hardware integrated system, the software reliability test and the hardware reliability test are synthesized. A comprehensive test method of software and hardware reliability based on profile mapping is proposed. In this method, the software test section and the comprehensive environmental stress profile are first determined, and then the software test section and the comprehensive environmental stress section are combined by using the profile mapping to form the software and hardware reliability comprehensive test profile. The comprehensive test profile truly reflects the relationship between software operation and changes in external environmental conditions, and avoids the risk of testing and waste of resources brought by software reliability testing and hardware reliability testing, respectively. At the same time, the test cost is reduced and the reliability of the product is verified by one test. The experimental results show that the method is feasible, reasonable and effective.
【作者單位】： 中國航空綜合技術研究所;
【基金】：科工局課題([2012]1481)
【分類號】：TP306

【相似文獻】

相關期刊論文 前7條

1 馬士超;王貞松;姜珊珊;;基于網絡模型的軟/硬件可靠性分析[J];計算機應用研究;2007年07期

2 郭榮佐;黃君;王霖;;基于Markov鏈的嵌入式系統硬件可靠性研究[J];計算機應用;2012年04期

3 藍志洋,黃明華;嵌入式系統硬件可靠性和抗干擾性技術[J];現代電子技術;2005年14期

4 楊s，

本文編號：2212300