【摘要】：再生碼通過允許節點傳送所存數據的線性組合并增加修復入度,顯著地降低了修復帶寬,但是增加了參與節點數和磁盤I/O。針對這一缺點,首先通過分析再生碼的閾值函數得到一個定理,指出了降低閾值函數的一個充要條件;然后根據該定理構造出了結合復制方式的新再生碼。新再生碼不增加修復入度也能降低閾值函數,與再生碼類似,也有兩個特殊點——最小存儲量點和最小修復帶寬點。通過對兩個特殊點的定性與定量分析,發現新再生碼可以利用復制來降低單節點修復帶寬,并且平均修復帶寬和平均磁盤I/O也會減少。
[Abstract]:The regenerative code significantly reduces the repair bandwidth by allowing nodes to transmit linear combinations of stored data and increases repair input but increases the number of participating nodes and disk I / O. In view of this shortcoming, a theorem is obtained by analyzing the threshold function of the reproducing code, and a necessary and sufficient condition for reducing the threshold function is pointed out, and then a new reproducing code combined with the reproduction mode is constructed according to the theorem. The new regenerative code can reduce the threshold function without increasing the repair penetration. Similar to the reproducing code, there are two special points: the minimum memory point and the minimum repair bandwidth point. Through the qualitative and quantitative analysis of two special points, it is found that the new regenerated code can reduce the repair bandwidth of single node by using replication, and the average repair bandwidth and the average disk I / O can also be reduced.
【作者單位】： 空軍工程大學防空反導學院;
【分類號】：TP333
，

本文編號：2193890