【摘要】：綜合電子系統是皮衛星的數據和指令樞紐,承擔皮衛星數據處理、數據存儲、數據傳輸及指令收發、響應等重要任務,是皮衛星的核心組成部分。皮衛星綜合電子系統大都采用高性能商用處理器,其性能一般都能滿足系統需求,可靠性是皮衛星綜合電子系統研究的重點。三模冗余是提高系統可靠性的一種常用方法,通常有基于時鐘同步和基于任務同步兩種途徑實現。相對于任務同步,基于時鐘同步的三模冗余系統降低了軟件設計復雜度,具有更好通用性,無疑是皮衛星綜合電子系統的首選。 本文對基于時鐘同步的三模冗余系統進行研究,根據三模冗余系統研究要求,結合皮衛星實際工程應用需求,完成了高可靠綜合電子系統的方案設計及硬件實現,經測試表明設計的綜合電子系統滿足皮衛星工程應用需求。 對三模冗余系統時鐘同步問題進行了研究,結果表明DSP程序運行在片內時,3個DSP可以實現時鐘同步,DSP程序運行在片外時,3個DSP不能保證時鐘同步；對時鐘不同步原因進行了分析,通過分析和實驗發現DSP CPU與EMFIB口間通信有可能是DSP程序運行在片外時不同步的原因。
[Abstract]:The integrated electronic system is the data and instruction hub of the picosatellite. It is the core component of the picosatellite, which is responsible for the important tasks of data processing, data storage, data transmission, instruction receiving and sending and responding. The picosatellite integrated electronic system mostly uses high performance commercial processor, its performance generally can meet the system demand, the reliability is the focal point of the research of the picosatellite integrated electronic system. Triple mode redundancy is a common method to improve the reliability of the system. It is usually realized by two ways: clock synchronization and task-based synchronization. Compared with task synchronization, the three-mode redundant system based on clock synchronization reduces the complexity of software design and has better versatility. It is undoubtedly the first choice of integrated electronic system of picosatellite. In this paper, the three-mode redundancy system based on clock synchronization is studied. According to the requirements of the three-mode redundancy system and the practical engineering application requirements of the picosatellite, the scheme design and hardware implementation of the high-reliability integrated electronic system are completed. The test results show that the designed integrated electronic system can meet the requirements of picosatellite engineering applications. The problem of clock synchronization in three-mode redundant system is studied. The results show that when the DSP program is running in the chip, three DSP programs can realize the clock synchronization while the DSP program is running off-chip, and the three DSP can not guarantee the clock synchronization. By analyzing and experimenting the reason of clock unsynchronism, it is found that the communication between DSP CPU and EMFIB port may be the reason why DSP program is not synchronized when it is running out of chip.
【學位授予單位】：浙江大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP368.1;V443

【參考文獻】

相關期刊論文 前1條

1 葛寶珊,李波,姚春連,劉德良;高速數字系統中信號完整性和傳輸延時分析[J];計算機工程與設計;2003年02期

相關博士學位論文 前1條

1 王同權;高能質子輻射效應研究[D];中國人民解放軍國防科學技術大學;2003年

相關碩士學位論文 前1條

1 袁果;三模冗余系統中的同步研究[D];西南交通大學;2008年

，

本文編號：2161110