本文選題：監測裝置 + LPC2214��； 參考：《南京理工大學》2012年碩士論文

【摘要】：如今人們的生活越來越依賴電能,因此,對電網電力參數的監測就顯得非常重要。本文所述的電力監測裝置是一種多功能電力參數測量?jī)x表,能夠?qū)崟r(shí)監測電網的運行狀態。 本裝置以飛利浦公司推出的高性能低功耗的LPC2214芯片和ADI公司的專用電能計量芯片ADE7878為核心,其中LPC2214芯片主要完成對ADE7878芯片的電力參數測量值的讀取,電壓電流瞬時波形的采集與諧波分析、人機交互和其他監控功能。此外,裝置帶有RS485通信接口,能夠方便的與上位機進行本地和遠程通信。ADE7878實現對電網數據的采集并進行有功、無功及視在功率,有功能量以及無功能量,電壓、電流有效值計算等。 本論文首先介紹了電力計量的發展?fàn)顩r,對目前國內外常見的電力監測裝置的結構進行了綜述,接著闡述了基本電力參數的測量原理,然后詳細介紹了多功能電力監測裝置的硬件設計和軟件設計,給出了總體設計方案、詳細的硬件原理圖和軟件設計流程圖。其中,硬件設計包括采樣電路、電源電路、核心電路和顯示電路等,軟件系統是以嵌入式實時操作系統μC/OS-Ⅱ?yàn)楹诵?將其移植到LPC2214處理器上。最后對裝置各個功能模塊做了初步整合,采用三相精準測試電源對監測裝置進行了實驗論證,通過實測數據表明該裝置具有較高的測量精度,能夠?qū)崟r(shí)和穩定的工作,達到了預期設計要求。
[Abstract]:Nowadays, people depend more and more on electric energy, so it is very important to monitor power parameters. The power monitoring device described in this paper is a kind of multifunctional power parameter measuring instrument, which can monitor the running state of power network in real time. The device is based on Philips LPC2214 chip with high performance and low power consumption and ADE7878 from ADI company, in which LPC2214 chip mainly reads the power parameter measurement value of ADE7878 chip. Voltage and current instantaneous waveform acquisition and harmonic analysis, man-machine interaction and other monitoring functions. In addition, the device has RS485 communication interface, which can conveniently communicate with the host computer for local and remote communication. ADE7878 can collect and carry out active power, reactive power and apparent power, active power and reactive energy, and reactive energy and voltage. Calculation of effective value of current, etc. This paper first introduces the development of electric power metering, summarizes the structure of common power monitoring devices at home and abroad, and then expounds the measuring principle of basic power parameters. Then the hardware design and software design of the multifunctional power monitoring device are introduced in detail. The overall design scheme, the detailed hardware schematic diagram and the software design flow chart are given. The hardware design includes sampling circuit, power supply circuit, core circuit and display circuit. The software system is transplanted to LPC2214 processor based on embedded real-time operating system 渭 C / OS- 鈪，

本文編號：2049105