本文選題：數字存儲示波器 + USB��； 參考：《電子科技大學》2013年碩士論文

【摘要】：隨著科學技術的快速發展，當今數字存儲示波器（DSO）性能有著日益顯著的提高，功能亦趨向多樣化、集成化。數字存儲示波器提供了RS232接口、LAN口、GPIB接口、USB接口等多種接口。其中USB即通用串行總線，這種接口自身有許多優點，所以目前已經成為數字存儲示波器的必備接口。 本論文針對具有USB接口的數字存儲示波器進行一系列的軟件開發。根據USB主機從設備模型，將論文軟件分為以下兩個部分的內容： 首先，當DSO數字存儲示波器作為USB設備接到PC機上時，開發PC端針對數字存儲示波器的功能驅動程序，使PC機可以識別該儀器，實現windows下操作該儀器，并編寫windows的控制臺應用程序，操作該儀器，驗證驅動的功能。同時開發DSO數字存儲示波器PCB板端的固件程序，配合PC端的驅動程序?qū)崿F(xiàn)PC機對設備的識別、枚舉以及配置操作。 其次，當DSO數字存儲示波器作為USB主機系統外接存儲介質時，開發示波器主機端的軟件驅動程序，主要包括主機棧程序，可以實現對USB設備的枚舉配置工作并管理設備的拔插操作，以及在主機棧的基礎上開發大容量類設備驅動，傳輸處理層用Bulk-Only傳輸協議實現，命令塊層用到的指令集是UFI，可以實現主機系統讀寫UFI設備的數據以及獲取UFI設備的信息等操作，，然后在此基礎之上添加FAT文件系統，增強主機對優盤文件的管理能力。 本論文的研究符合當前數字存數示波器的大體發展趨勢，進一步實現了DSO數字存儲示波器的功能多樣化，對于數字示波器的進一步研發具有積極意義。
[Abstract]:With the rapid development of science and technology, the performance of DSO (Digital Storage Oscilloscope) has been improved day by day, and the functions are becoming diversified and integrated. Digital storage oscilloscope provides RS232 interface LAN interface GPIb interface USB interface and other interfaces. USB is the universal serial bus, this interface has many advantages, so it has become a necessary interface for digital storage oscilloscope. This paper develops a series of software for digital storage oscilloscope with USB interface. According to USB host slave device model, the thesis software is divided into the following two parts: first, when DSO digital storage oscilloscope is connected to PC as USB device, The function driver of PC for digital storage oscilloscope is developed, so that PC can recognize the instrument, realize the operation of the instrument under windows, write the windows console application program, operate the instrument and verify the function of the driver. At the same time, the firmware program of PCB board of DSO digital storage oscilloscope is developed, and the device identification, enumeration and configuration operation are realized with the driver of PC. Secondly, when the DSO digital storage oscilloscope is used as the external storage medium of USB host system, the software driver of the host terminal of the oscilloscope is developed, which mainly includes the host stack program. It can realize the enumeration and configuration of USB devices and manage the device pull-in operation, and develop a large capacity device driver on the basis of host stack. The transport processing layer is realized by Bulk-Only transport protocol. The instruction set used in the command block layer is UFI, which can read and write the data of UFI device and obtain the information of UFI device. Then, the fat file system is added on this basis to enhance the host's ability to manage the USB disk file. The research in this paper accords with the general development trend of the digital storage oscilloscope at present, and further realizes the function diversification of the DSO digital storage oscilloscope, which has positive significance for the further research and development of the digital oscilloscope.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP334.7;TP311.52

【參考文獻】

相關期刊論文 前3條

1 宋鵬,竇振中,李凱;USB控制器芯片按功能分類的特性比較[J];電子產品世界;2004年19期

2 錢宇紅;;USB數據傳輸卡WDF驅動程序開發[J];計算機應用與軟件;2012年06期

3 春水東流;安裝驅動程序更省事[J];網絡與信息;2003年05期

相關碩士學位論文 前5條

1 楊文一;Windows磁盤信息分析處理系統的研究與實現[D];廈門大學;2008年

2 張全士;USB接口驅動程序的設計與開發[D];電子科技大學;2009年

3 劉春見;基于DSP的凝析天然氣流量計量儀表研制[D];中國石油大學;2009年

4 端木衛建;基于USB2_0傳輸接口的影碟機視頻采集系統[D];山東科技大學;2009年

5 賈欣欣;數字存儲示波器USB接口與外設驅動程序設計研究[D];電子科技大學;2010年

本文編號：2042903