本文選題：加速度傳感器 + 角速度傳感器��； 參考：《北方工業大學》2012年碩士論文

【摘要】：隨著競技體育的發展,體育科研對于運動員成績的提高起到了越來越重要的作用。對于鐵餅項目來說,廣泛采用二維平面攝影以及三維測力平臺來揭示人體對鐵餅的作用規律,并不能清楚的揭示人手對于鐵餅的作用過程,而這才是體育教學、教練員和運動員最關心的問題。在鐵餅投擲項目中,還沒有出現較理想的測量設備。而鐵餅的投擲優劣,與鐵餅的受力和投擲角度密切相關,可以近似得到鐵餅出手時刻的姿態和受力,基于此來深入研究投擲的全過程,但目前國內外還沒有此類測量?jī)x器。 本文研究的數字化鐵餅硬件電路系統,根據鐵餅的國際標準設計出內置電路板的鐵餅結構,研制出基于加速度傳感器和角速度傳感器的、能夠得到鐵餅整個運動過程中鐵餅的三維加速度和三維角速度信息的鐵餅,獲取的數據可以通過無線發射模塊發送,并由無線接收模塊接收數據,最終由計算機進行處理得到鐵餅的運動參數,實時實現動力學信息的獲取�？捎糜�(jì)算機處理數據,存儲有用信息；能夠單獨使用,也可以與其它儀器設備的搭配使用。體育工作研究人員可以借助這種測量手段獲取的數據,尋找關于鐵餅投擲的新理論和新規律。 本文研究的數字化鐵餅電路系統,經過實際投擲實驗驗證,采集到的三維加速度和三維角速度數據較準確,能實時無線傳輸,裝置工作穩定。通過無線射頻模塊無線傳輸鐵餅運動過程中的數據,克服了傳統的有線傳輸方式的局限性,為遠程獲取設備的數據提供了有效的手段。
[Abstract]:With the development of competitive sports, sports scientific research plays a more and more important role in improving athletes' performance. For the discus project, two-dimensional photography and three-dimensional force-measuring platform are widely used to reveal the law of human body's action on discus, which can not clearly reveal the action process of human hands on discus, and this is the physical education teaching. Coaches and athletes are most concerned about. In the discus throwing event, there is no ideal measuring equipment. The discus throwing is closely related to the force and the throwing angle of the discus, and the posture and force of the discus throwing moment can be approximately obtained. Based on this, the whole process of the discus throwing can be deeply studied. However, there are no such measuring instruments at home and abroad. The digital discus hardware circuit system studied in this paper, according to the international standard of discus, designs the discus structure of the built-in circuit board, and develops the system based on acceleration sensor and angular velocity sensor. The obtained data can be transmitted through a wireless transmitting module and received by a wireless receiving module, which can obtain the three-dimensional acceleration and three-dimensional angular velocity information of the discus during the whole process of the discus movement. Finally, the motion parameters of discus can be obtained by computer, and the dynamic information can be obtained in real time. Use computers to process data and store useful information; can be used separately or in conjunction with other instruments. With the help of the data obtained by this kind of measurement, the researchers of sports work can find new theories and new laws about discus throwing. The digital discus circuit system studied in this paper has been verified by the actual throwing experiments. The collected 3D acceleration and 3D angular velocity data are accurate, can be transmitted wireless in real time, and the device works stably. Wireless transmission of data in discus motion by radio frequency module overcomes the limitation of traditional wired transmission mode and provides an effective means for remote acquisition of device data.
【學位授予單位】：北方工業大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP212.9;TP368.1

【參考文獻】

相關期刊論文 前10條

1 張鵬;常洪龍;苑偉政;胡敏;;虛擬陀螺技術研究[J];傳感技術學報;2006年05期

2 袁紅艷,唐毅,宋光明,宋全軍,葛運健,劉建國;數字式鉛球傳感器的研制及應用[J];傳感器技術;2004年09期

3 孫圣和;;現代傳感器發展方向[J];電子測量與儀器學報;2009年01期

4 時志云;蓋建平;王代華;張志杰;;新型高速無線射頻器件nRF24L01及其應用[J];國外電子元器件;2007年08期

5 何昆鵬;程萬娟;高延濱;梁海波;;虛擬陀螺技術在MEMS慣性導航系統中的應用[J];哈爾濱工程大學學報;2009年10期

6 孫旺強,宋光明,邱聯奎,沈春山,唐毅,葛運建;基于三維加速度計數字鉛球的設計與實現[J];計算機工程與應用;2005年04期

7 牛晶;楊惠;王海鴻;;光電傳感器創新應用[J];科技致富向?qū)?2011年20期

8 李新剛,袁建平;微機械陀螺的發展現狀[J];力學進展;2003年03期

9 葛運建,張建軍,戈瑜,吳仲城,高理富;無所不在的傳感與機器人感知[J];自動化學報;2002年S1期

10 李建中,李金寶,石勝飛;傳感器網絡及其數據管理的概念、問題與進展[J];軟件學報;2003年10期

相關博士學位論文 前1條

1 何昆鵬;MEMS慣性器件參數辨識及系統誤差補償技術[D];哈爾濱工程大學;2009年

相關碩士學位論文 前3條

1 胡敏;基于陣列技術的MEMS虛擬陀螺技術研究[D];西北工業大學;2006年

2 陳紅英;人體—標槍系統對標槍飛行初始條件的影響及標槍飛行的計算機模擬[D];太原理工大學;2007年

3 趙毅博;數字化鐵餅三維信息采集系統的研制與檢測[D];河北師范大學;2008年

，

本文編號：2008565