本文選題：嵌入式系統 + 記錄儀��； 參考：《南京理工大學》2013年碩士論文

【摘要】：隨著測試技術的不斷發展和記錄儀表對多元化、智能化的需求,將嵌入式系統用于大型、復雜系統的記錄儀表是必然的。新一代的嵌入式系統不僅在處理能力上遠大于普通的單片機系統,而且豐富的外圍資源也大大縮短了產品的開發周期,同時,嵌入式系統也能更好的適應惡劣的環境條件。 本文主要研究嵌入式系統在為某型武器裝備研發的多類型數據車載記錄儀中的應用。實現了對CAN數據、RS422數據、VGA高清圖像、PAL制式圖像等武器系統數據的采集、記錄、回放、數據轉移等功能。 多類型數據車載記錄儀硬件平臺采用了PC104、FPGA、DSP等嵌入式結構,軟件系統采用了Embedded Visual C++、Verilog HDL、Lab View等進行開發。 本文主要內容為： 1、通過對某型武器系統工作流程的研究,結合產品的環境適應性及可靠性的要求,多類型數據車載記錄儀選擇嵌入式系統進行系統開發。 2、描述了多類型數據車載記錄儀的總體設計方案,詳細介紹了硬件結構的設計和軟件系統的設計 3、針對武器系統工作的環境要求,介紹了多類型數據車載記錄儀的工程設計方法,并介紹了整機測試及試驗情況。
[Abstract]:With the continuous development of test technology and the demand of multiple and intelligent recording instruments, it is inevitable to apply embedded systems to record instruments in large and complex systems. The new generation of embedded system not only has much more processing power than the ordinary single-chip microcomputer system, but also the rich peripheral resources greatly shorten the product development cycle, at the same time, the embedded system can better adapt to the bad environmental conditions. This paper mainly studies the application of embedded system in multi-type data vehicle recorder developed for a certain weapon equipment. The functions of data acquisition, recording, playback, data transfer and so on for CAN data collection, recording, playback, data transfer and so on are realized. The hardware platform of the multi-type data on-board recorder adopts the embedded structure such as PC104 FPGA DSP, and the software system is developed with Embedded Visual C Verilog HDL Lab View and so on. The main contents of this paper are as follows: 1. Through the research of the work flow of a certain weapon system, combining with the requirement of the environment adaptability and reliability of the product, the multi-type data on-board recorder selects the embedded system to carry on the system development. 2. The overall design scheme of multi-type data on-board recorder is described. The design of hardware structure and software system are introduced in detail. 3. According to the environment requirement of weapon system, this paper introduces the engineering design method of multi-type data on-board recorder, and introduces the whole machine test and test situation.
【學位授予單位】：南京理工大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP368.1;TP216.2

【參考文獻】

相關期刊論文 前5條

1 王冬成;晁愛農;劉孟強;;基于WinCE的檢測系統通信設計與實現[J];微計算機信息;2008年32期

2 孫建;蘇中;黃倩;;基于Flash的大容量高速數據記錄儀設計[J];微計算機信息;2010年26期

3 陳躍宗;;嵌入式系統概述及其應用前景[J];新西部(下半月);2007年04期

4 徐小林;桂先洲;;武器系統的數據記錄技術研究[J];中國科技信息;2007年12期

5 張廣瑩,徐麗娜,鄧正隆;PC/104嵌入式計算機的應用[J];自動化技術與應用;2000年05期

，

本文編號：1913438