本文選題：嵌入式計算機 + FPGA　； 參考：《西安電子科技大學》2012年碩士論文

【摘要】：普通打印機的USB接口為USB從口，打印機只能作為USB從設備，接收PC機通過USB接口傳來的數據，無法實現無PC機USB接口直接打印，，給用戶的使用帶來不便。 本文主要研究打印機的嵌入式計算機，可支持移動存儲設備中圖像數據的直接打印。首先，設計了一個基于ARM11和FPGA的打印機嵌入式計算機，利用ARM11內置的USB主機接口，實現主動讀取U盤、移動硬盤等移動存儲設備中的圖像信息。其次，通過對誤差擴散算法研究，利用豐富的硬件資源，采用查找表來替代乘法運算，在FPGA內部使用硬件描述語言實現誤差擴散法IP核，同時采用流水線設計方案，每個時鐘周期即可計算一個像素點的半色調值，提高了系統的執行效率。最后，通過對跳白塊編碼算法的改進，在FPGA內部設計跳白塊編碼改進算法IP核，減少了存儲空間，支持多拷貝打印。 本文通過對打印機嵌入式計算機及相應關鍵技術的深入研究，實現了打印機USB接口直接打印，滿足了系統設計的初衷。
[Abstract]:The USB interface of ordinary printer is USB slave port. The printer can only be used as USB slave device to receive data from PC through USB interface. It can not print directly without USB interface of PC, which brings inconvenience to users. This paper mainly studies the embedded computer of printer, which can support the direct printing of image data in removable storage device. Firstly, a printer embedded computer based on ARM11 and FPGA is designed. By using the USB host interface built into ARM11, we can read the image information from the U disk and the mobile hard disk. Secondly, through the research of error diffusion algorithm, using abundant hardware resources, using lookup table to replace multiplication operation, using hardware description language to realize error diffusion IP core in FPGA, and adopting pipeline design scheme at the same time. Each clock cycle can calculate the halftone value of a pixel, which improves the efficiency of the system. Finally, through the improvement of the white block hopping coding algorithm, the IP core of the white block hopping coding improved algorithm is designed in FPGA, which reduces the storage space and supports multi-copy printing. In this paper, the printer USB interface is directly printed through the deep research of the printer embedded computer and the corresponding key technology, which satisfies the original intention of the system design.
【學位授予單位】：西安電子科技大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP334.8

【參考文獻】

相關期刊論文 前1條

1 張冠男,王樹勛,溫泉;一種基于隨機誤差分散技術的半色調水印方法[J];吉林大學學報(工學版);2004年04期

相關碩士學位論文 前2條

1 張靖;數字半色調技術研究[D];西安電子科技大學;2008年

2 劉勇;二值圖像壓縮編碼算法的若干研究[D];山東大學;2009年

本文編號：1881954