本文選題：金屬微滴　切入點：三維打印　出處：《機械設計與制造》2014年08期

【摘要】：金屬微滴三維打印成形技術是一種新的快速分層制造方法,為了獲取零件模型的離散化層面數據,實現零件的分層打印制造。依據金屬微滴三維打印成形工藝原理,利用Visual C++6.0和Open GL,在Windows XP平臺上,開發出面向金屬微滴三維打印成形工藝的數據處理軟件。利用該軟件得到的成形數據信息,以Sn60/Pb40合金為試驗材料,在280℃噴射溫度、100k Pa噴射壓力和200μm熔滴直徑下,進行了打印沉積試驗,打印成形結果與零件模型吻合較好,驗證了數據處理軟件的可行性,為金屬微滴三維打印成形技術的發展奠定了基礎。
[Abstract]:Three-dimensional printing forming technology for metal droplets is a new rapid layered manufacturing method. In order to obtain discrete layer data of part model and realize layering printing manufacturing of parts, the three-dimensional printing forming technology of metal droplet is based on the principle of three-dimensional printing forming technology of metal droplets. Using Visual C 6.0 and Open GL, the data processing software of 3D printing forming process for metal droplets was developed on the platform of Windows XP. Using the forming data information obtained by the software, the Sn60/Pb40 alloy was used as the experimental material. Under the injection pressure of 100kPa at 280 鈩，

本文編號：1664904