本文選題：料場倉庫管理　切入點：手持終端　出處：《杭州電子科技大學》2013年碩士論文　論文類型：學位論文

【摘要】：料場倉庫是一個企業生產所需原材料囤積的重要場所，是企業生產的起點和源泉。料場倉庫的管理在企業的整個管理過程中有著至關重要的作用，直接影響著企業的生產效率和生產效益。隨著企業生產規模的擴大和入庫原材料種類的多樣化發展，倉庫管理中所使用的傳統數據采集終端已經難以滿足倉庫管理中信息采集的實時、準確、移動性要求�；谇度胧郊夹g(shù)的數據終端設備在倉庫管理中的應用，大大方便了料場原材料入庫和出庫的管理，使得企業能夠?qū)α蠄?chǎng)倉庫實時、在線、移動式的管理，提高了企業的生產效率。 本文的研究背景是基于鋼鐵生產企業的料場倉庫的，對一個鋼鐵生產企業來說，鋼鐵生產所需原材料種類本身就比較繁多，而且其原材料的管理還有著不同于一般貨物管理的特殊性，因此找到合理的料場管理方式，對鋼鐵企業來說就顯得更為重要了。文章首先介紹了鋼廠料場倉庫在原材料稱重入庫管理上的現狀及存在的問題，然后參考了國內外料場倉庫管理上的技術經驗，針對鋼廠料場倉庫存在的問題提出了將基于嵌入式技術的便攜式手持終端應用到料場倉庫管理中的解決方案。然后進一步分析了應用于料場倉庫管理中的手持終端應該具備的功能和構建一款符合料場倉庫管理實際應用的手持終端的開發流程。在課題項目中，設計了一款基于嵌入式技術的性能穩定、持續工作時間長、功耗低、適合實際應用的便攜式手持終端，并且搭建了一個基于手持設備的應用軟件平臺來完成料場倉庫原材料的入庫和管理。 文章以手持終端的設計開發為主線，在基于對手持終端功能需求分析的基礎上，討論了手持終端設計的方案，然后詳細描述了手持終端的硬件系統設計和軟件平臺的設計。在硬件系統設計上，首先介紹了手持終端處理器的選型，，然后描述了手持終端最小系統模塊、人機交互模塊、無線通訊模塊、射頻讀寫模塊以及電源管理模塊的硬件電路設計，并詳細闡述了各模塊控制芯片的特性以及模塊設計原理。在手持終端軟件平臺設計上，完成軟件平臺的搭建后，詳細敘述了相關驅動程序的開發和應用軟件的開發。最后對手持終端的功能模塊性能和在料場倉庫入庫管理中應用的性能進行了測試和總結。論文的結尾部分對本文的研究成果和存在的不足進行了總結和分析，為進一步研究提出展望。
[Abstract]:Material warehouse is an important place for enterprises to hoard raw materials, which is the starting point and source of production. The management of material warehouse plays an important role in the whole process of enterprise management. It has a direct impact on the production efficiency and benefit of enterprises. With the expansion of production scale and the diversification of the types of raw materials in storage, The traditional data acquisition terminal used in warehouse management has been difficult to meet the real-time, accurate and mobile requirements of information collection in warehouse management. The application of data terminal equipment based on embedded technology in warehouse management. It greatly facilitates the management of the raw materials in and out of the warehouse, and enables the enterprise to manage the warehouse in real time, online and mobile, thus improving the production efficiency of the enterprise. The research background of this paper is based on the material warehouse of iron and steel production enterprise. For a steel production enterprise, there are many kinds of raw materials needed for steel production. Moreover, the management of raw materials is different from that of general goods management, so a reasonable material yard management method is found. It is more important for iron and steel enterprises. This paper first introduces the present situation and existing problems of raw material weighing and entering warehouse management in steel yard warehouse, and then refers to the technical experience of material yard warehouse management at home and abroad. In view of the problems existing in the warehouse of steel factory material yard, this paper puts forward the solution of applying the portable handheld terminal based on embedded technology to the warehouse management of the material yard. Then, the paper further analyzes the handheld terminal used in the warehouse management of the material yard. The functions that the end should have and the development process of building a handheld terminal that conforms to the practical application of material warehouse management. A portable handheld terminal based on embedded technology is designed, which has the advantages of stable performance, long working time, low power consumption and suitable for practical application. An application software platform based on handheld devices is built to complete the storage and management of raw materials in the warehouse. Taking the design and development of handheld terminal as the main line, based on the analysis of the functional requirements of the handheld terminal, this paper discusses the design scheme of the handheld terminal. Then the hardware system design and software platform design of handheld terminal are described in detail. In hardware system design, the selection of handheld terminal processor is first introduced, and then the minimum system module and man-machine interaction module of handheld terminal are described. The hardware circuit design of wireless communication module, radio frequency reading and writing module and power management module is given, and the characteristics of each module control chip and the design principle of module are described in detail. After the completion of the software platform, The development of related driver and application software are described in detail. Finally, the function module performance of handheld terminal and the performance of application in warehouse management of material yard are tested and summarized. The research results and shortcomings of this paper are summarized and analyzed. The prospect for further study is put forward.
【學位授予單位】：杭州電子科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TN929.53;TP368.1

【參考文獻】

相關期刊論文 前2條

1 王曉華;周曉光;孫百生;;超高頻射頻識別讀寫器設計[J];電子測量技術;2007年02期

2 張益強,鄭銘,張其善;遠距離射頻識別系統及其應用前景[J];中國數據通信;2004年01期

相關博士學位論文 前1條

1 韓益鋒;射頻識別閱讀器的研究與設計[D];復旦大學;2005年

相關碩士學位論文 前3條

1 周祥;RFID技術在物聯網中應用的關鍵技術探討[D];江蘇大學;2005年

2 王曉;標準化作業指導書系統的分析和設計[D];山東大學;2007年

3 陽軍;基于嵌入式系統的網絡化高速數據采集平臺的設計[D];四川大學;2007年

本文編號：1607290