本文關鍵詞： 嵌入式系統 電能質量 DSP ARM Windows CE　出處：《華北電力大學》2012年碩士論文　論文類型：學位論文

【摘要】：針對當前電網電能質量檢測的實際問題,借鑒已有的檢測理論和實踐成果,依據我國制定的電能質量檢測儀器通用要求,結合嵌入式系統在電能質量檢測中的應用,最終設計并研制了基于嵌入式DSP和ARM處理器雙CPU為核心,輔以其它必要的嵌入式外圍電路而組成的電能質量檢測儀。利用DSP芯片強大的數字運算能力,完成基本電力參數和各項電能指標的計算和分析。利用ARM9系列微處理器速度快、高性能、外圍接口豐富和方便移植嵌入式實時操作系統等優勢,實現系統多任務調度,數據顯示和存儲等功能。 檢測儀的硬件電路設計包括信號采集運算的DSP部分和數據顯示存儲的ARM部分。主要有數據采集模塊電路設計、高速A/D轉換電路設計、DSP最小系統設計、ARM最小系統和外圍電路以及兩個處理器之間數據傳輸模塊雙口RAM的電路設計。檢測儀的軟件設計與編寫同樣包括兩個部分,在DSP子系統下,利用CSS3.1集成開發環境,完成數據采集與運算程序的編寫。在ARM子系統下,實現WindowsCE5.0嵌入式操作系統的定制與安裝,并在Windows CE5.0操作系統的基礎上,利用VS2005開發工具設計實現了電能質量檢測的主控軟件。 最后,通過實驗室三相電能功率標準源的實際測試,得到電能質量檢測儀的實測數據,分析其測量誤差并通過軟硬件方式進行調試和修正。實驗表明,本文研制的電能質量檢測儀,其電力參數和各項電能質量指標的檢測基本達到了預期準確度。
[Abstract]:In view of the practical problems of power quality detection in power grid at present, based on the existing testing theory and practical results, according to the general requirements of power quality testing instruments formulated in our country, combined with the application of embedded system in power quality detection, Finally, a power quality detector based on embedded DSP and dual CPU of ARM processor is designed and developed, which is composed of other necessary embedded peripheral circuits, and makes use of the powerful digital computing ability of DSP chip. Based on the advantages of ARM9 series microprocessors, such as high speed, high performance, rich peripheral interfaces and convenient transplanting of embedded real-time operating system, the multitask scheduling of the system can be realized. Data display and storage and other functions. The hardware circuit design of the detector includes the DSP part of signal acquisition and the ARM part of data display and storage. Design of High Speed A / D conversion Circuit the minimum system Design of DSP the circuit design of arm minimum system and peripheral circuit as well as the dual-port RAM of data transmission module between two processors the software design and writing of the detector also includes two parts under the DSP subsystem. Using the CSS3.1 integrated development environment, the data acquisition and operation program are compiled. Under the ARM subsystem, the WindowsCE5.0 embedded operating system can be customized and installed, and on the basis of the WindowsCE5.0 operating system, the embedded operating system can be customized and installed. The main control software of power quality detection is designed by using VS2005 development tool. Finally, through the actual test of the standard source of three-phase power power in the laboratory, the measured data of the power quality detector are obtained, and the measurement error is analyzed and debugged and corrected by the way of software and hardware. The experimental results show that, The power quality detector developed in this paper has achieved the expected accuracy in the detection of its power parameters and power quality indexes.
【學位授予單位】：華北電力大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TM711;TP368.12

【參考文獻】

相關期刊論文 前10條

1 李林功,李華玲;嵌入式系統的構成與特點[J];電測與儀表;2003年05期

2 劉忠富;游國棟;;基于雙CPU的電網綜合參數監測系統的研究[J];電測與儀表;2007年12期

3 蘇士美;楊鵬;;基于DSP和ARM的新型電力諧波監測儀設計[J];電測與儀表;2009年11期

4 王勛;苑方丞;羅健文;;饋線保護中雙口RAM的DSP與ARM9雙CPU系統接口電路設計[J];工業控制計算機;2009年11期

5 余師棠;肖兵;;基于DSP與ARM的電能質量監測分析系統[J];信息技術;2010年05期

6 段成剛,宋政湘,陳德桂,王建華;嵌入式電能質量監測器的設計[J];繼電器;2003年05期

7 李碧芬;;基于DSP平臺的嵌入式電力參數測量系統的設計[J];計算機與數字工程;2010年05期

8 張?jiān)?王艷君;;基于DSP和ARM的嵌入式電能質量監測系統[J];微計算機信息;2008年17期

9 駱曉明;楊拴科;金印彬;;基于DSP+ARM的便攜式電能質量分析儀設計[J];現代電子技術;2010年05期

10 李紅,楊善水;傅立葉電力系統諧波檢測方法綜述[J];現代電力;2004年04期

相關碩士學位論文 前7條

1 申偉杰;基于嵌入式的電能質量數據采集系統的研究與設計[D];湖南大學;2006年

2 杜景琦;基于ARM-Linux嵌入式電能質量監測儀的研究與設計[D];東北電力大學;2008年

3 饒麗華;基于ARM和DSP的電能質量監測儀的研究[D];同濟大學;2008年

4 王麗穎;基于DSP和ARM的電能質量監測系統[D];上海交通大學;2009年

5 杜崇高;基于DSP和WinCE的電力參數測量系統[D];華北電力大學（河北）;2009年

6 曾滔;基于TMS320F2812的電能質量檢測系統設計[D];廈門大學;2009年

7 陳樹;基于ARM和DSP技術的電能質量監測系統的研究與設計[D];南京理工大學;2009年

，

本文編號：1536735