本文關鍵詞： 奧利維爾 燒制過程 自動模式 　出處：《裝飾》2017年08期 　論文類型：期刊論文

【摘要】：正有關3D打印的話題已經熱議了好幾年,各領域都在探索這一技術在應用上的可能性。荷蘭設計師奧利維爾(Olivier van Herpt)在陶瓷打印領域取得了一定的成果。相對于其他材料而言,陶土具有很強的特殊性,含水量小則黏度低,含水量大則不易成型,或成型后坍塌。能夠進行打印的材料在后期燒制過程中也有可能出現一些問題,因此3D打印技術在陶瓷行業一直沒有得到很好的應用。經過兩年多的開發和試驗,奧利維爾設計出一臺高約1.7米、三角支撐式的陶土3D打印機,精度很高,可打印陶器的尺寸約為高80厘米、寬40厘米。與其他物品不同,
[Abstract]:Is the hot topic of 3D printing has been for several years, in various fields are exploring the possibility of this technology in application. Holland designer Olivier (Olivier van Herpt) has made great achievements in the field of ceramic printing. Compared with other materials, clay has a strong special moisture, small viscosity low moisture content is not easy molding, molding or collapse. Can print the materials later in the firing process may also have some problems, so 3D printing technology in the ceramic industry has not been very good application. After the development and testing of more than two years, Olivier designed a high of about 1.7 m, triangular support type clay 3D printer, high precision printing pottery size is about 80 cm high, 40 cm wide and various other items,

【分類號】：TP334.8
，

本文編號：1496547