本文關鍵詞： 數據總線 ARINC429 FPGA USB2.0 接口設計　出處：《西安科技大學》2013年碩士論文　論文類型：學位論文

【摘要】：現有航空電子設備的測試系統體積大，，價格昂貴，鑒于此本課題在詳細研究ARINC429數據總線協議以及參考國內外芯片設計的基礎上，結合大規�？删幊碳夹g(shù)，提出了一種基于USB總線的解決方案。本課題通過USB總線完成接口板與PC主機之間的通信，采用可編程邏輯器件FPGA實現ARINC429信號的接收與發送以及與USB總線接口間的通信，大大簡化了系統設計，使PC主機和板卡的連接過程變得更為簡單，實現了測試設備的便攜性和使用的靈活性。 論文首先介紹了課題的研究背景、意義和設計中涉及到的關鍵技術，如ARINC429數據總線的通信協議以及USB設備的開發流程等。然后給出系統的總體設計思路。之后詳細闡述了系統軟硬件設計與實現。其中系統硬件電路設計主要包括：USB總線接口電路、USB-429總線通信接口電路、調制解調電路的設計；系統軟件主要包括：接口固件程序、USB驅動程序和用戶應用程序三部分。最后，通過自行搭建的硬件平臺對系統進行測試。 課題設計接口卡實現了相互獨立2路發送通道、2路接收通道，傳輸速率100kbps或12.5kbps可選，數據字長32bit，發送時間間隔可設，經過測試該接口卡性能穩定，具有良好的數據傳送能力，可以方便地應用到基于ARINC429總線的航空電子設備的測試中。
[Abstract]:The existing avionics testing system is large in volume and expensive in price. In view of this topic, we study the ARINC429 data bus protocol in detail and refer to the design of chips at home and abroad. Combined with large-scale programmable technology, a solution based on USB bus is proposed. The communication between interface board and PC host is accomplished by USB bus. The programmable logic device (FPGA) is used to realize the receiving and transmitting of ARINC429 signal and the communication with USB bus interface, which greatly simplifies the design of the system. It makes the connection process between PC host and board more simple, and realizes the portability and flexibility of test equipment. The paper first introduces the research background, significance and key technologies involved in the design. For example, the communication protocol of ARINC429 data bus and the developing flow of USB equipment. Then the overall design idea of the system is given. Then, the design and implementation of the system hardware and software are described in detail. The circuit design includes:. USB bus interface circuit. USB-429 bus communication interface circuit, modulation and demodulation circuit design; The system software mainly includes three parts: interface firmware program USB driver and user application program. Finally, the system is tested through the self-built hardware platform. The interface card is designed to realize two independent transmission channels and two receiving channels. The transmission rate is 100kbps or 12.5kbps, and the data word length is 32bit. The transmission time interval can be set, the performance of the interface card is stable, and the interface card has good data transfer ability. It can be applied to the test of avionics equipment based on ARINC429 bus conveniently.
【學位授予單位】：西安科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TP334.7

【參考文獻】

相關期刊論文 前5條

1 鄭麗娜;翟林培;李清軍;;在ARINC429航空總線設備中實現USB功能[J];電光與控制;2008年04期

2 鄧智敏,張軍;基于HS3282的ARINC429總線通訊卡的設計與應用[J];計算機測量與控制;2004年05期

3 史國慶;高曉光;吳勇;張建東;;基于PCI總線的ARINC429總線接口板硬件設計與實現[J];計算機測量與控制;2010年01期

4 羅斌,杜洪根;便攜式ARINC429總線測試儀設計[J];無線電工程;2005年06期

5 溫曉佩;;USB接口驅動程序開發[J];自動化技術與應用;2010年11期

本文編號：1455439