本文關鍵詞： D打印機 打印效率 噴嘴直徑 表面粗糙度　出處：《機床與液壓》2017年19期 　論文類型：期刊論文

【摘要】：目前桌面3D打印機受到了許多領域的關注,但由于桌面3D打印機是通過逐層累加的方式來構造實體,所以與傳統的切削加工相比,熔融沉積成型的桌面3D打印機生產效率較低。為提高桌面3D打印機的生產效率,提供了一種優化零件構建時間的方法。即通過零件表面采用直徑為0.4 mm的噴嘴進行成型加工,填充區域采用直徑為1.2 mm的噴嘴進行成型加工,并與現有單噴頭方法進行對比實驗,發現該方法在保證表面粗糙度不變的前提下能大幅度縮短構建時間。為提高桌面3D打印機效率提供了一種新思路。
[Abstract]:At present, desktop 3D printer has been paid attention to in many fields. However, because desktop 3D printer is constructed by layer by layer, it is compared with traditional cutting process. In order to improve the productivity of desktop 3D printer, the production efficiency of molten deposition molding desktop 3D printer is low. This paper provides a method for optimizing the construction time of parts, that is, the nozzle with diameter 0.4 mm is used to form the surface of the part, and the nozzle with 1.2 mm diameter is used for forming the filling area. Compared with the existing single nozzle method, it is found that this method can greatly shorten the construction time without changing the surface roughness, which provides a new way to improve the efficiency of desktop 3D printer.
【作者單位】： 鄭州科技學院機械工程學院;
【基金】：河南省科技廳科技攻關項目(162102210331)
【分類號】：TP334.8
【正文快照】： 0前言經過近30年的發展,3D打印技術已滲透到汽車制造、航空航天、文化娛樂、醫療假肢等領域。但與任何技術一樣,3D打印的新技術在其形成、發展的過程中,同樣也存在著局限性。盧秉恒指出,目前增材制造技術在我國主要應用于產品研發,且制造成本高、制造效率低、制造精度尚不能令，

本文編號：1453610