本文關鍵詞：基于嵌入式平臺的智能信息處理子站的研究與設計　出處：《南京郵電大學》2012年碩士論文　論文類型：學位論文

  更多相關文章： 智能變電站 嵌入式操作系統 程序化控制 信息一體化平臺

【摘要】：近年來,計算機技術、信息處理技術和網絡通信技術發展迅速,對變電站自動化系統產生了巨大影響。隨著特高壓、大容量、超大系統電網的逐漸形成,對電網安全、穩定、可靠、控制、信息交互等提出了更高更迫切的要求�；贗EC61850系列標準可以實現變電站的集成化、智能化和信息化,使廠站自動化設備從結構上、配置上、技術性能上和應用上出現巨大的變化,促使變電站自動化系統結構由變電站層、間隔層的二層結構向變電站層、間隔層、過程層三層結構過渡,將實現廠站監控系統的無縫信息交換,建立開放式結構,實現資源的優化和整合。IEC61850采用對象建模技術,面向設備建模和自我描述的思想,實現所有廠家的智能設備互操作的目標,提升了系統的水平,豐富了變電站智能化技術的內涵,為智能化變電站技術健康發展不斷提供可靠支撐。 本文闡述了智能變電站發展歷史和現狀,多角度全方位詳細分析了本文所研究的智能信息處理子站;文章從智能變電站對信息子站的功能需求出發,研究了智能信息處理子站的幾項關鍵技術,綜合了現有通訊管理機的現狀,提出了基于嵌入式硬件平臺以及嵌入式Linux操作系統的軟件系統總體方案架構。文章描述了采用面向?qū)ο蟮腛OA方法設計的智能信息處理子站軟件結構并就其中的程序化控制等關鍵技術提出了具體的實現方法,最后本文舉例說明了智能信息處理子站在智能變電站的應用情況并展望了采用先進的軟硬件平臺智能信息子站的美好的未來及其重要的現實意義。
[Abstract]:In recent years, computer technology, information processing technology and network communication technology rapid development, has a great impact on the substation automation system. With the ultra high voltage, large capacity, gradually formed a large system of power grid, the grid security, stability, reliability, control, information exchange and put forward more and more urgent requirements can be integrated. The IEC61850 series of standards implementation of substation based on intelligence and information, the station automation equipment from the structure, configuration, great changes on technical performance and application, the substation automation system structure by the substation layer, the two layer structure of interlayer spacing to the substation layer, layer, process layer three layer structure the transition will achieve seamless information exchange station monitoring system, the establishment of the open structure, realize resource optimization and integration of.IEC61850 with object modeling technology to device modeling and self description The idea of achieving the goal of interoperability of intelligent devices of all manufacturers improves the level of the system, enriches the connotation of substation intelligent technology, and provides reliable support for the healthy development of intelligent substation technology.
This paper describes the history and current situation of intelligent substation development, multi angle comprehensive detailed analysis of the intelligent information processing substation; article based on information sub station from the functional requirements of intelligent substation, studied several key technologies of intelligent information processing substation, comprehensive status of the existing communication management machine, put forward the architecture of the overall scheme of the software system and the embedded hardware platform based on embedded Linux operating system. This paper describes the design method of the OOA object oriented intelligent information processing substation software structure and the key technology of program control and put forward the concrete realization method, finally this paper illustrates the application of intelligent information processing in sub station the situation and Prospect of intelligent substation using advanced software and hardware platform of intelligent information sub station bright future and important practical significance.

【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP368.1

【參考文獻】

相關期刊論文 前10條

1 柏嵩,陳斌,唐濤,沈曙明;IEC870-5-103規約的應用經驗[J];電力系統自動化;2000年13期

2 洪憲平;走向網絡化的遠動系統[J];電力系統自動化;2001年06期

3 譚文恕;遠動信息的網絡訪問[J];電力系統自動化;2001年12期

4 唐濤;電力系統廠站自動化技術的發展與展望[J];電力系統自動化;2004年04期

5 翁國慶,陳明軍,王富榮;變電站本地監控嵌入式操作系統及應用軟件[J];電力系統自動化;2004年12期

6 章堅民,趙舫,馬傳思;嵌入式變電站智能信息集成與數據服務器的設計與開發[J];電力系統自動化;2005年09期

7 孫一民;侯林;揭萍;唐成虹;;間隔層保護測控裝置防誤操作實現方法[J];電力系統自動化;2006年11期

8 黃福祥,唐濤;500kV變電站計算機監控系統的實施[J];電力自動化設備;2002年01期

9 譚文恕;遠動的無縫通信系統體系結構[J];電網技術;2001年08期

10 譚文恕;變電站通信網絡和系統協議IEC61850介紹[J];電網技術;2001年09期

，

本文編號：1382836