【摘要】：為澄清無水硫鋁酸鈣的水化反應機理,利用化學試劑Ca CO3、Al2O3、Ca SO4合成純度達90%以上的無水硫鋁酸鈣(C4A3嫜)單礦物,研究其在水灰比為0.3、05、0.7條件下的水化反應,包括不同水化時間的水化產物及變化規律,用X射線衍射儀、綜合熱分析儀和掃描電子顯微鏡對水化產物進行分析.結果表明:水化產物為含不同摩爾結晶水的2種單硫型水化硫鋁酸鈣C4A嫜H12(AFm-12)和C4A嫜H1 4(AFm-14)以及無定形狀態的鋁凝膠(AH3),整個水化過程未生成鈣礬石(AFt);隨著水化時間的延長,C4A嫜H12(AFm-12)會逐漸轉化為C4A嫜H1 4(AFm-14);水化反應主要集中發生在3~12 h,后期C4A嫜H1 4晶體不斷長大.
[Abstract]:In order to clarify the hydration mechanism of anhydrous calcium sulphoaluminate, anhydrous calcium sulphoaluminate (C4A3) single mineral with purity of more than 90% was synthesized by using chemical reagent Ca CO3,Al2O3,Ca SO4. The hydration products of different hydration times were analyzed by X-ray diffractometer, comprehensive thermal analyzer and scanning electron microscope. The results show that the hydration products are C4A H12 (AFm-12) and C4A H14 (AFm-14) and amorphous aluminum gel (AH3) containing different molar crystalline water. No ettringite (AFt); is formed in the whole hydration process with the hydration time. C4A-H12 (AFm-12) was transformed into C4A-H14 (AFm-14), and the hydration reaction mainly occurred at 3h, and the crystal of C4A-H14 grew up at the later stage.
【作者單位】： 大連理工大學土木工程學院;
【基金】：國家自然科學基金資助項目(51472041)
【分類號】：TQ172.1

【相似文獻】

相關期刊論文 前10條

1 張巨松,李好新,隋智通;氧化鈦對無水硫鋁酸鈣形成的熱分析實驗研究[J];沈陽建筑工程學院學報(自然科學版);2002年03期

2 張巨松,隋智通,回志峰,安會勇;鈣鈦礦對無水硫鋁酸鈣形成的影響[J];東北大學學報;2005年03期

3 薛君s，

本文編號：2255734