本文選題：協調控制器 + 智能切換控制��； 參考：《控制工程》2017年08期

【摘要】：在水泥熟料生產過程中,生料在分解爐內的分解是一個復雜的物理化學反應。由于生料流量波動大且生料邊界條件頻繁變化,生產過程經常處于異常工況,導致預熱器C5出口溫度高于上限,致使預熱器C5下料管堵塞造成生產停產。為了解決上述問題,提出了一個具有前饋補償?shù)臏囟戎悄芮袚Q控制策略,由分解爐溫度和預熱器C5出口溫度協調控制器、異常工況控制器和切換機制組成。實際應用結果表明,所提出的控制策略能夠根據當前工況的變化選擇正確的控制器,并且使生產遠離故障工況。
[Abstract]:In the process of cement clinker production, the decomposition of raw material in calciner is a complex physical chemical reaction. Because the raw material flow fluctuates greatly and the raw material boundary condition changes frequently, the production process is often in abnormal working condition, which leads to the temperature of the outlet of the preheater C5 being higher than the upper limit, resulting in the blockage of the preheater C5 discharge tube and the production stoppage. In order to solve the above problems, a temperature intelligent switching control strategy with feedforward compensation is proposed, which consists of a coordinated controller for calciner temperature and C5 outlet temperature of preheater, a controller for abnormal working conditions and a switching mechanism. The practical application results show that the proposed control strategy can select the correct controller according to the change of the current working conditions and make the production away from the malfunction condition.
【作者單位】： 沈陽工業大學機械工程學院;流程工業綜合自動化國家重點實驗室東北大學;
【基金】：國家自然科學基金項目(61573249,61273177,61573364) 中國博士后科學基金資助項目(2014M561249,2015T80268,2015T80798) 遼寧省博士科研啟動基金(201501082) 流程工業綜合自動化國家重點實驗室開放課題面上基金資助
【分類號】：TP273;TQ172.6

【相似文獻】

相關期刊論文 前3條

1 張寶忠,由宏君;區域切換控制的分析與調整[J];貴州化工;2004年03期

2 陳世江,劉宗全,朱忠平,吳永偉,羅迪輝;PLC在“6000”空分切換控制系統中的應用[J];深冷技術;1991年03期

3 吳同軍;可逆換熱器切換控制的完善[J];化工設計;2002年06期

，

本文編號：1970059