本文選題：響應面法 + 鍶廢渣��； 參考：《無機鹽工業》2017年05期

【摘要】：以碳還原法生產碳酸鍶產生的鍶廢渣為原料,以質量分?jǐn)?shù)為30%的硝酸酸浸廢渣中的鍶鹽,研究了該浸取工藝中浸取時間、溶液pH、浸取溫度對鍶浸取率的影響。在單因素實驗的基礎上,以鍶浸取率為響應指標,采用響應面分析法確定了最優鍶浸取率的工藝條件:浸取時間為90.89 min、溶液pH為1.08、浸取溫度為22.76℃。在此條件下得到實際測量值為82.07%,與理論預測值82.14%基本吻合。該研究可為提高鍶資源的利用率提供參考。
[Abstract]:The effects of leaching time, solution pH and leaching temperature on the leaching rate of strontium were studied by using strontium waste residue from strontium carbonate produced by carbon reduction process as raw material and strontium salt in acid leaching waste residue of nitric acid of 30% by mass fraction. On the basis of single factor experiment, the optimum technological conditions of strontium leaching rate were determined by response surface analysis method: leaching time was 90.89 min, solution pH was 1.08, leaching temperature was 22.76 鈩，

本文編號：1845016