本文選題：鐵 + 鎳合金��； 參考：《電鍍與涂飾》2017年03期

【摘要】：采用脈沖電鍍法在2024鋁合金基體上制備Fe Ni合金薄膜,研究了脈沖占空比對鍍層組織形貌和晶體結構的影響。結果表明,所制FeNi_80合金鍍層為典型的面心立方晶體結構,具有(111)和(200)晶面擇優取向。提高脈沖占空比,鍍層粗糙度增大。脈沖占空比為30%時所制備的200μm厚FeNi_80合金鍍層在10~100 kHz低頻磁場下的屏蔽效能達到36~55 dB。
[Abstract]:Fe Ni alloy thin films were prepared on 2024 aluminum alloy substrate by pulse electroplating. The effect of pulse duty ratio on the microstructure and crystal structure of the coating was studied. The results show that the FeNi_80 alloy coating has a typical face-centered cubic crystal structure with preferred orientation of crystal plane. The roughness of the coating increases with the increase of pulse duty cycle. The shielding efficiency of the 200 渭 m thick FeNi_80 alloy coating prepared by the pulse duty cycle of 30 渭 m in a low frequency magnetic field of 10 ~ 100 kHz is 36 ~ 55 dB.
【作者單位】： 北京有色金屬研究總院;
【分類號】：TQ153.2

【相似文獻】

相關期刊論文 前10條

1 雷芳;程為彬;習璐;王曉翠;;舞臺照明的變占空比閃爍控制[J];電氣應用;2014年06期

2 翁海峰,陳秋龍,蔡s，

本文編號：1836760