本文選題：刀具磨損 + 表面形態　； 參考：《工具技術》2017年05期

【摘要】：分別使用硬質合金刀具、金剛石刀具、立方氮化硼刀具對氟金云母陶瓷及二硅酸鋰玻璃陶瓷材料進行車削試驗。利用顯微鏡觀察刀具磨損形貌,通過能譜分析研究了刀具的磨損機理。試驗結果表明,刀具磨損部位主要集中在刀尖和后刀面,刀具磨損形式主要為磨料磨損和粘結磨損。用硬質合金刀具車削氟金云母陶瓷時,切削深度越小,磨料磨損越嚴重。
[Abstract]:The turning tests of fluorophlogopite ceramics and lithium-silicate glass ceramics were carried out by using carbide cutting tools diamond tools and cubic boron nitride cutters respectively. The wear mechanism of the tool was studied by energy spectrum analysis. The experimental results show that the tool wear parts are mainly concentrated on the tip and the back of the tool, and the wear forms of the tool are mainly abrasive wear and bond wear. When turning fluorophlogopite ceramics with cemented carbide tools, the lower the cutting depth, the more serious the abrasive wear.
【作者單位】： 東北大學;秦皇島鴻泰科技股份有限公司;
【基金】：國家自然科學基金(51275083)
【分類號】：TQ174.6

【相似文獻】

相關期刊論文 前10條

1 白雪清;于愛兵;賈大為;陳W，

本文編號：1831015