本文選題：氣相法白炭黑 + 表面改性　； 參考：《非金屬礦》2017年02期

【摘要】：以特變電工新疆新能源股份有限公司化學氣相沉積(CVD)法生產的白炭黑為原料,采用濕法改性工藝,六甲基二硅氮烷(HMDZ)為改性劑,水為改性助劑,甲苯為溶劑,對其進行有機化改性研究。由單因素及正交實驗得到氣相法白炭黑表面改性的最佳工藝條件為:改性溫度110℃,改性時間1.5 h,改性劑用量15%,攪拌速率900 r/min。對改性產品進行技術指標測試,結果表明:產品達到疏水性白炭黑標準要求。通過采用接觸角、IR、TG手段對改性效果進行表征,結果表明改性后白炭黑表面呈現良好的疏水性。
[Abstract]:Silica produced by chemical vapor deposition (CVD) method of Xinjiang New Energy Co., Ltd was used as raw material, modified by wet process, HMDZ as modifier, water as modifier, toluene as solvent, HMDZ as modifier, water as modifier, toluene as solvent, water as modifier and toluene as solvent. The organic modification was studied. The optimum conditions for surface modification of fumed silica were obtained by single factor and orthogonal experiment. The optimum conditions were as follows: modification temperature 110 鈩，

本文編號：1808121