本文選題：激光制造 + 飛秒激光　； 參考：《中國激光》2017年01期

【摘要】：采用飛秒激光脈沖輻照不同羥基濃度的純石英玻璃,誘導其內部產生缺陷。系統研究了羥基濃度、激光脈寬和激光功率對缺陷類型和濃度的影響。石英玻璃的顯微熒光譜、吸收譜和發射譜測試表明,飛秒激光誘導石英玻璃可以產生非橋氧空穴中心(NBOHC)、非弛豫氧空位[ODC(Ⅱ)]和E′心3種缺陷;低羥基濃度石英玻璃易產生ODC(Ⅱ)缺陷,高羥基濃度石英玻璃易產生NBOHC缺陷。用波長為254nm的紫外燈激發飛秒激光輻照后的高羥基濃度石英玻璃可觀察到明顯的紅色熒光(波長為650nm),其發光強度與飛秒激光的脈寬和功率相關,發光強度隨激光脈寬的增加先增加后減小,隨激光功率的增加先增加后趨于平緩。
[Abstract]:Pure quartz glass with different hydroxyl concentration was irradiated by femtosecond laser pulse to induce defects. The effects of hydroxyl concentration, laser pulse width and laser power on defect type and concentration were systematically studied. The photoluminescence spectra, absorption spectra and emission spectra of quartz glass show that the femtosecond laser induced quartz glass can produce three defects: NBOHCO, ODC (鈪，

本文編號：1781475