本文選題：圓錐破碎機 + 腔型��； 參考：《武漢科技大學》2015年碩士論文

【摘要】：本文基于總體平衡理論和層壓破碎理論對圓錐破碎機的破碎產品質量和生產能力進行了深入研究，，進一步建立了基于圓錐破碎機生產能力的腔型結構參數優化模型，為改進和研制新型、高效、節能的圓錐破碎機提供一定的理論依據。本文主要工作和內容如下： (1)以單顆粒物料為研究對象，通過矢量法推導出單顆粒物料以滑動方式通過破碎腔的運動特性的解析表達式。 (2)基于總體平衡理論，對圓錐破碎機的破碎過程模型進行了深入研究，進一步通過理論分析實現了對物料破碎過程中粒度分布的預測。同時，對圓錐破碎機破碎產品針片率的經驗?zāi)Ｐ头治�，得出了給料平均尺寸和閉邊排料口尺寸對產品針片率的影響。 (3)對計算生產率的新方法進行了理論推導，以PYB900圓錐破碎機為例驗證理論模型的正確性，并對影響圓錐破碎機生產率的工作參數和結構參數進行了分析，得到了圓錐破碎機生產率與腔型結構參數之間的關系。 (4)基于對圓錐破碎機生產能力的研究，建立了以圓錐破碎機生產率為目標函數的腔型結構參數優化模型，利用Matlab軟件對PYB900圓錐破碎機腔型結構參數進行優化求解，結合優化后的腔型結構參數采用圖解法畫出圓錐破碎機的基本腔型；進一步基于最小磨損理論對考慮動錐襯板磨損情況繪制出動錐曲線圖。
[Abstract]:Based on the overall equilibrium theory and the laminated crushing theory, the quality and production capacity of the cone crusher are studied in this paper, and the optimization model of the cavity structure parameters based on the production capacity of the cone crusher is established.It provides some theoretical basis for improving and developing new type, high efficiency and energy saving cone crusher.The main work and contents of this paper are as follows:1) taking the single particle material as the research object, the analytical expression of the motion characteristic of the single particle material passing through the broken cavity by sliding mode is derived by the vector method.2) based on the general equilibrium theory, the crushing process model of cone crusher is deeply studied, and the prediction of particle size distribution in the process of material crushing is realized through theoretical analysis.At the same time, the influence of the average feed size and the size of the closed edge discharge port on the needle rate of the product is obtained by analyzing the empirical model of the needle rate of the broken product of the cone crusher.The new method of calculating productivity is theoretically deduced. The correctness of the theoretical model is verified by taking PYB900 cone crusher as an example, and the working parameters and structural parameters that affect the productivity of cone crusher are analyzed.The relationship between the productivity of cone crusher and the structure parameters of cavity is obtained.Based on the research on the production capacity of cone crusher, the optimization model of cavity structure parameters is established, which takes the productivity of cone crusher as the objective function. Using Matlab software, the cavity structure parameters of PYB900 cone crusher are optimized and solved.The basic cavity shape of the cone crusher is drawn by graphic method combined with the optimized cavity structure parameters, and the moving cone curve is further drawn on the basis of the minimum wear theory.
【學位授予單位】：武漢科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TQ051.9

【參考文獻】

相關期刊論文 前10條

1 高利;遲毅林;胡云波;;圓錐破碎機生產能力數學模型的研究[J];機械設計;2010年08期

2 黃冬明;武殿梁;范秀敏;姚福生;;圓錐破碎機的多目標規劃設計[J];機械工程學報;2007年03期

3 董鋼;范秀敏;黃東明;;基于產品質量控制預測機制的圓錐破碎機優化方法[J];機械工程學報;2010年03期

4 樊保興;圓錐破碎機的改進[J];礦山機械;1996年02期

5 郎寶賢;圓錐破碎機現狀和發展方向[J];礦山機械;2001年01期

6 劉樹英,聞邦椿;新型振動圓錐破碎機的研究[J];礦山機械;2005年01期

7 丁培洪,王宏勛,朱俊利;高效顎式破碎機的研制[J];北京礦冶研究總院學報;1992年01期

8 郎寶賢;郎世平;;圓錐破碎機生產率計算[J];礦山機械;2009年13期

9 黃冬明;范秀敏;武殿梁;姚福生;;基于散體物料運動學特性的圓錐破碎機性能優化[J];上海交通大學學報;2007年04期

10 任海;董為民;陳洪;;PYB1200圓錐破碎機參數優化[J];新技術新工藝;2010年11期

本文編號：1758449