發布時間：2018-04-04 15:17

  本文選題：釩尾渣　切入點：助磨劑　出處：《中國粉體技術》2017年02期

【摘要】：采用攪拌磨對釩尾渣進行超細粉磨,考察4種助磨劑的助磨效果,確定最合適的助磨劑為焦磷酸鈉,對焦磷酸鈉助磨產品的粒徑分布、表面電位、表面吸附特性以及顆粒形貌等進行測定分析。結果表明,攪拌磨制備釩尾渣微粉的最佳參數為:添加焦磷酸鈉質量分?jǐn)?shù)為1.8%,礦漿質量濃度為1 g/mL,粉磨30 min,所得產品D_(50)=7.85μm、D_(90)=19.78μm,相比未添加焦磷酸鈉的磨礦產品D_(50)、D_(90)分別減小了2.97、8.47μm,粉磨時間縮短至少10 min。焦磷酸鈉通過在釩尾渣顆粒表面的吸附,增大顆粒的表面電位,減少微細顆粒在表面的粘附,降低礦漿黏度,從而提高釩尾渣的粉磨效率。
[Abstract]:The grinding effect of four kinds of grinding aids on vanadium tailings was investigated by mixing mill. The most suitable grinding aids were sodium pyrophosphate, particle size distribution and surface potential of the grinding products.The surface adsorption characteristics and particle morphology were measured and analyzed.The results show that鎼呮媽紓ㄥ埗澶囬拻灝炬福寰矇鐨勬渶浣?jīng)_弬鏁頒負:娣誨姞鐒︾７閰擱挔璐ㄩ噺鍒嗘暟涓，

本文編號：1710519