本文選題：微磨削　切入點：石英玻璃　出處：《東北大學學報(自然科學版)》2017年02期

【摘要】：建立了微磨削過程的傳熱模型,針對石英玻璃材料進行有限元仿真分析,探討了微磨削過程中磨削熱的分布情況,分析磨削用量對磨削溫度的影響規律.利用粒度500#的微磨具對石英玻璃進行單因素磨削溫度測量實驗.仿真與實驗結果表明:磨削區表面最高溫度隨切削深度的增大而升高,隨磨削速度的加快而升高,實測最高磨削區溫度僅為94.2℃,并沒有出現磨削燒傷現象.
[Abstract]:The heat transfer model of the micro - grinding process is established , and the distribution of grinding heat in the micro - grinding process is analyzed by finite element simulation analysis of the quartz glass material . The experimental results show that the maximum temperature of the surface of the grinding area increases with the increase of the cutting depth , and increases with the increase of the grinding speed . The measured maximum grinding zone temperature is only 94.2 鈩，

本文編號：1690901