蒸發式空冷器低密度翅片管束干工況換熱及阻力特性
發布時間:2018-03-23 08:20
本文選題:空氣冷卻器 切入點:翅片管 出處:《華東理工大學學報(自然科學版)》2017年04期 論文類型:期刊論文
【摘要】:建立了工業用8排翅片管束空冷實驗裝置,討論了翅片管干式空冷代替光管濕式空冷的可行性,研究低進口風溫、風量對翅片管干式空冷換熱的影響。實驗結果表明:低進口風溫下,翅片管干式空冷可用來代替光管濕式空冷換熱,降低進口風溫能有效強化翅片管干式空冷換熱,其換熱能力亦隨著配風量的增加而提高。實驗中翅片管管外換熱系數和管束壓降實驗值與國外關聯式計算結果有差別,擬合給出本實驗翅片管管外傳熱關聯式及管束壓降關聯式,為工業應用設計提供依據。
[Abstract]:An air cooling experiment device with 8 rows of finned tube bundles for industrial use was established. The feasibility of replacing wet air cooling with finned tubes with dry air cooling was discussed, and the low inlet air temperature was studied. The effect of air volume on the heat transfer of finned tube dry air cooling. The experimental results show that the fin tube dry air cooling can be used to replace the light tube wet air cooling heat transfer under low inlet air temperature, and reducing the inlet air temperature can effectively enhance the fin tube dry air cooling heat transfer. The heat transfer capacity also increases with the increase of air distribution. The experimental values of heat transfer coefficient and pressure drop of tube bundles are different from those calculated by the foreign correlation formula. The external heat transfer correlation and the pressure drop correlation of tube bundles are given in this paper, which provides the basis for industrial application design.
【作者單位】: 華東理工大學承壓系統與安全教育部重點實驗室;
【分類號】:TQ051.5
【相似文獻】
中國期刊全文數據庫 前8條
1 R.Leenaerts,肖君石;帶縱向翅片管管束的計算方法[J];硫酸工業;1979年S2期
2 馬義偉,孫慶復;空氣橫掠翅片管簇的放熱和阻力試驗研究[J];化工煉油機械通訊;1980年S1期
3 張雯;捕集升華物質用翅片管熱交換器[J];化工裝備技術;1988年06期
4 В.Б.КУНТЫШ ,Л М.ФЕДОТОВА ,龐志慶;翅片管束幾何尺寸對放熱和阻力的影響[J];流體工程;1986年05期
5 毛小平,迂飛;空氣橫掠翅片管束管外放熱和氣流阻力的試驗研究[J];石油化工設備;1988年04期
6 田永生,陳昕寬,凌旭;大管徑高翅擴面管傳熱特性的試驗研究[J];石油化工設備;1992年02期
7 張建成,,徐通明;冷態下高含塵氣流繞流直翅片管管束的積灰研究[J];南京化工大學學報;1994年S1期
8 王兆X;馬軍;韓卓;王春暉;;表面蒸發式空冷器翅片管結垢分析[J];石油化工設備;2014年S1期
本文編號:1652645
本文鏈接:http://sikaile.net/kejilunwen/huagong/1652645.html