本文選題：一氧化碳　切入點：優先氧化　出處：《天然氣化工(C1化學與化工)》2017年02期 　論文類型：期刊論文

【摘要】：采用普通化學浸漬法和超聲浸漬法分別制備了負載Pt質量分數為0.5%、1.0%和2.0%的Pt/γ-Al_2O_3催化劑,并對其結構進行表征。研究了制備條件和反應條件對催化劑性能的影響。結果表明,超聲浸漬法制備的負載Pt質量分數為1%的催化劑在氧碳比(n(O_2)/n(CO))為1.5,空速(VHSV)為6000~9000h~(-1),反應溫度為120~140℃條件下,可以在較長時間內將出口的CO體積分數降至10×10~(-6)以下。
[Abstract]:Pt/ 緯 -Al _ 2O _ 3 catalysts supported on 0.5% Pt and 2.0% wt% Al _ 2O _ 3 were prepared by chemical impregnation method and ultrasonic impregnation method, respectively. The structure of the catalysts was characterized. The effects of preparation conditions and reaction conditions on the performance of the catalysts were studied. The supported Pt catalyst with 1% mass fraction prepared by ultrasonic impregnation can reduce the volume fraction of CO in export to 10 脳 10 ~ (-6) ~ (-1) in a long time under the conditions of oxygen to carbon ratio (O _ (2) / n ~ (-1)) = 1.5, space velocity (VHSV) = 6 000 ~ (9 000) h ~ (-1) ~ (-1) and reaction temperature (120 ~ 140 鈩，

本文編號：1637951