本文選題：鈦酸鋇陶瓷　切入點：固相反應法　出處：《人工晶體學報》2017年07期 　論文類型：期刊論文

【摘要】：采用固相反應方法在不同燒結升溫速率下制備了BaTiO_3陶瓷,并對陶瓷樣品的晶體結構、表面形貌、介電、壓電和鐵電性能進行了測試和分析。結果表明:當燒結升溫速率為3℃/min和5℃/min時陶瓷均為四方鈣鈦礦晶格結構,隨升溫速率的增大,四方相程度增強,材料平均晶粒尺寸減小,壓電系數和鐵電性能隨之降低,但介電常數隨之增大,當燒結升溫速率為5℃/min介電常數最大,其值為3144。當燒結升溫速率為1℃/min時陶瓷為正交鈣鈦礦晶格結構d_(33)和P_r最大,其值為P_r=10μC/cm~2和d_(33)=193 pC/N。
[Abstract]:BaTiO_3 ceramics were prepared by solid state reaction at different sintering temperature rates. The crystal structure, surface morphology and dielectric properties of the ceramics were investigated. The piezoelectric and ferroelectric properties were measured and analyzed. The results show that the ceramics are tetragonal perovskite lattice structure when the sintering rate is 3 鈩，

本文編號：1627872