本文選題：造紙白泥　切入點：摻量　出處：《廣西大學學報(自然科學版)》2017年01期 　論文類型：期刊論文

【摘要】：為了得到最優性能造紙白泥頁巖磚,通過加入不同的造紙白泥摻量(0%、10%、15%、20%)和燒結工藝對頁巖磚進行物理、力學試驗。研究結果表明,隨著造紙白泥摻量的增加,試件的燒失量、收縮率、吸水率增大,體積密度、抗壓強度降低,當燒結溫度為950℃~1 050℃,白泥摻量控制在15%內時可滿足《燒結普通磚》(GB5101-2003)的規定,造紙白泥顆粒粒徑小且數量較少時,可以有效降低磚體石灰爆裂的發生。
[Abstract]:In order to obtain the best performance of the white mud shale brick, the physical and mechanical tests of the shale brick were carried out by adding different amount of white mud into paper making and sintering process. The results showed that the burning loss of the sample was increased with the increase of the white mud content in paper making. The shrinkage rate, water absorption rate, volume density and compressive strength decreased. When sintering temperature was 950 鈩，

本文編號：1567584