本文關鍵詞： 立式氟化爐 CFD 溫度場 優化分析　出處：《機械設計與制造》2017年09期 　論文類型：期刊論文

【摘要】：為解決現行固定床稀土氟化爐內因溫度分布不均而導致的氟化效果不佳問題,以新型立式氟化爐為研究對象,通過合理簡化建立數學物理模型,采用CFD軟件對模型進行計算分析,得到了不均勻的反應器溫度場;結合傳熱理論討論了導致溫度場不均勻的主要因素,主要有氣體入口直徑和物料層厚度。采用單因素分析法對立式稀土氟化爐反應器進行優化分析,研究了反應器內溫度場隨氣體入口直徑與物料層厚度的變化規律,并獲得最佳入口直徑和物料層厚度值。根據優化結果建立幾何模型并模擬計算,溫度場較優化前有較大改善。
[Abstract]:In order to solve the problem of poor fluorination effect caused by the uneven temperature distribution in the present fixed bed rare earth fluorination furnace, a new vertical fluorination furnace is taken as the research object, and the mathematical and physical model is established through reasonable simplification. The non-uniform temperature field of the reactor is obtained by using the CFD software, and the main factors leading to the uneven temperature field are discussed in combination with the heat transfer theory. The gas inlet diameter and the thickness of the material layer are mainly studied. The variation of temperature field with the inlet diameter of the gas and the thickness of the material layer in the reactor is studied by using the single factor analysis method to optimize the reactor of rare earth fluorination furnace. The optimum inlet diameter and material layer thickness are obtained. Based on the optimization results, the geometric model is established and the simulation results show that the temperature field is better than that before optimization.
【作者單位】： 江西理工大學機電工程學院;
【分類號】：TQ054;TQ133.3
，

本文編號：1554104