本文關鍵詞： 碟式分離機 轉鼓 優化設計 有限元法　出處：《廣西大學》2015年碩士論文　論文類型：學位論文

【摘要】：分離機是重油發動機必不可少的前端設備。主要用于船舶動力裝置輔助設備,陸用柴油發電機組輔助設備,運輸行業的潤滑油二次利用凈化設備。分離機的作用是對重油或潤滑油中所含水分和機械雜質進行清除或凈化,保證燃油霧化質量、延長主機壽命。近幾年,隨著傳統能源柴油價格的大幅攀升,燃燒重油成為發動機行業的一個重要發展趨勢,為分離機提供了廣闊市場前景。本文主要針對的研究對象是KYDH205SD型碟式分離機。論文主要包括以下幾個方面的內容：第一,根據市場需要和公司實用開發的角度,分析幾種不同的結構和功能的分離機,從而優選一個最優的方案；第二,利用Siemens NX8.5三維造型軟件設計出各零件三維造型,然后在三維空間里組裝各個零件,在正式二維圖紙出來之前就已經解決了零件的干涉問題；第三,有限元分析軟件是當今機械產品設計的主流工具,在此利用ANSYS分析軟件進行對分離機轉鼓的最重要的工作部件做強度的有限元分析及優化,使零部件擁有在設計上穩定的性能和在結構上更優越的布局；最后,充分利用了企業的自身的制造優勢,制造出分離機樣機,并做性能試驗,最后才能夠初步確定了設計的合理性�？傊�,這次的分離機設計,不但使公司從此增加了分離機產品這一項新產品,同時,也在國內分離機技術領域內增加了一款新型的分離機。
[Abstract]:Separator is an essential front-end equipment for heavy oil engine. It is mainly used for auxiliary equipment of marine power plant, auxiliary equipment of diesel generator set for land use, The function of the separator is to remove or purify the moisture and mechanical impurities contained in heavy oil or lubricating oil, to ensure the quality of fuel atomization, and to prolong the life of the main engine. With the price of conventional diesel fuel rising dramatically, burning heavy oil has become an important development trend in the engine industry. The main research object of this paper is KYDH205SD disc separator. This paper mainly includes the following aspects: first, according to the market needs and the perspective of practical development of the company, This paper analyzes several kinds of separators with different structures and functions, so as to select an optimal scheme. Secondly, the 3D modeling software of Siemens NX8.5 is used to design the 3D modeling of each part, and then the parts are assembled in three dimensional space. The interference problem of the parts was solved before the formal two-dimensional drawings were released. Thirdly, the finite element analysis software is the mainstream tool in the design of mechanical products. In this paper, the ANSYS analysis software is used to analyze and optimize the strength of the most important working parts of the drum of the separator, so that the parts have stable performance in design and superior layout in structure. Taking full advantage of the manufacturing advantages of the enterprise, the separator prototype was manufactured, and the performance tests were done before the rationality of the design could be preliminarily determined. In short, the separator design this time, Not only has the company added a new separator product, but also a new type of separator has been added in the field of domestic separator technology.
【學位授予單位】：廣西大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TQ051.8

【參考文獻】

相關碩士學位論文 前6條

1 陳景超;碟式分離機動力特性分析與動平衡研究[D];廣東海洋大學;2013年

2 李盼;基于有限元的碟式分離機應力分析與結構優化[D];廣東海洋大學;2013年

3 蔡云輝;基于有限元法的碟式分離機轉鼓組件強度分析與評定[D];合肥工業大學;2012年

4 張總;碟式分離機轉鼓內流場研究[D];蘭州理工大學;2009年

5 楊志儒;碟式分離機的研究與優化設計[D];蘭州理工大學;2008年

6 顧巧祥;碟式分離機轉鼓強度計算及其可靠性分析[D];浙江工業大學;2003年

，

本文編號：1516790