海底管道屈曲傳播中管壁與扣入式止屈器非線性接觸問題研究
發布時間:2019-02-18 13:26
【摘要】:運用二維環模型模擬管道,采用非線性離散彈簧模型模擬了管道外壁與扣入式止屈器內壁之間的接觸.建立了其結構的彈塑性本構關系,構建了海底管道二維屈曲接觸力學模型,研究分析了海底管道在屈曲和管壁接觸過程中的承載力、結構變形以及截面應力分布等的變化規律.為了驗證該理論分析方法的準確性,將理論分析結果與ABAQUS軟件的模擬結果進行了對比,結果吻合良好;最后,將理論計算得到的屈曲壓潰壓力和屈曲傳播壓力分別與ABAQUS軟件模擬結果及全比例管道屈曲試驗進行了對比,證明了該理論方法的可靠性.該理論研究為進一步研究管道的屈曲傳播力學機制和止屈技術奠定了基礎.
[Abstract]:The two dimensional ring model is used to simulate the pipe and the nonlinear discrete spring model is used to simulate the contact between the outer wall of the pipe and the inner wall of the buckle type buckler. The elastoplastic constitutive relation of the structure is established, the two-dimensional buckling contact mechanics model of submarine pipeline is established, and the variation of bearing capacity, structural deformation and cross-section stress distribution of submarine pipeline in the process of buckling and pipe wall contact are studied. In order to verify the accuracy of the theoretical analysis method, the theoretical analysis results are compared with the simulation results of ABAQUS software, and the results are in good agreement. Finally, the calculated buckling pressure and buckling propagation pressure are compared with the simulation results of ABAQUS software and the full-scale pipeline buckling test, respectively, and the reliability of the theoretical method is proved. The theoretical study lays a foundation for further study on the mechanism of buckling propagation and anti-buckling technique.
【作者單位】: 天津大學水利工程仿真與安全國家重點實驗室;上海交通大學高新船舶與深海開發裝備協同創新中心;海洋石油工程股份有限公司;中國海洋大學工程學院;
【基金】:國家重點基礎研究發展計劃(973計劃)資助項目(2014CB046804) 國家自然科學基金資助項目(51239008)~~
【分類號】:P756.2
本文編號:2425883
[Abstract]:The two dimensional ring model is used to simulate the pipe and the nonlinear discrete spring model is used to simulate the contact between the outer wall of the pipe and the inner wall of the buckle type buckler. The elastoplastic constitutive relation of the structure is established, the two-dimensional buckling contact mechanics model of submarine pipeline is established, and the variation of bearing capacity, structural deformation and cross-section stress distribution of submarine pipeline in the process of buckling and pipe wall contact are studied. In order to verify the accuracy of the theoretical analysis method, the theoretical analysis results are compared with the simulation results of ABAQUS software, and the results are in good agreement. Finally, the calculated buckling pressure and buckling propagation pressure are compared with the simulation results of ABAQUS software and the full-scale pipeline buckling test, respectively, and the reliability of the theoretical method is proved. The theoretical study lays a foundation for further study on the mechanism of buckling propagation and anti-buckling technique.
【作者單位】: 天津大學水利工程仿真與安全國家重點實驗室;上海交通大學高新船舶與深海開發裝備協同創新中心;海洋石油工程股份有限公司;中國海洋大學工程學院;
【基金】:國家重點基礎研究發展計劃(973計劃)資助項目(2014CB046804) 國家自然科學基金資助項目(51239008)~~
【分類號】:P756.2
【相似文獻】
相關期刊論文 前3條
1 余建星;林曉龍;楊源;葉彬彬;藍天;張英;;深水海底管道整體式止屈器屈曲動態傳播及止屈研究[J];海洋技術;2013年02期
2 余建星;馬維林;陳飛宇;林秋雅;劉見德;;海底管道止屈器形式與設計方法研究概述[J];海洋工程;2013年04期
3 ;[J];;年期
相關會議論文 前2條
1 王猛;孫國民;;深水管道局部屈曲擴展及止屈器設計方法研究[A];第十六屆中國海洋(岸)工程學術討論會(下冊)[C];2013年
2 羅超;王琮;任翠青;;海底管道整體式止屈器結構設計及數值模擬[A];第十五屆中國海洋(岸)工程學術討論會論文集(上)[C];2011年
,本文編號:2425883
本文鏈接:http://sikaile.net/kejilunwen/haiyang/2425883.html
最近更新
教材專著